ragemem benchmark results thread !

here's mine with latest patch from m3X:

RAGEMEM v0.37 - compiled 11/06/2010

CPU: AMCC PPC440EP 1.3 @ 799 Mhz
Caches Sizes: L1: 32 KB - L2: none - L3: none
Cache Line: 128

---> CPU <---
MAX MIPS: 1598

---> L1 <---
READ32: 2853 MB/Sec
READ64: 5669 MB/Sec
WRITE32: 2862 MB/Sec
WRITE64: 5685 MB/Sec

---> RAM <---
READ32: 299 MB/Sec
READ64: 299 MB/Sec
WRITE32: 166 MB/Sec
WRITE64: 166 MB/Sec
WRITE: 899 MB/Sec (Tricky)

---> VIDEO BUS <---
READ: 32 MB/Sec *** was: 14 MB/Sec before patch ***
WRITE: 50 MB/Sec

@328gts

Try after applying the following second part of the patch:

http://www.acube-systems.biz/index.php?page=news&id=76

@m3x

That's mine with the latest update (1.1):

RAGEMEM v0.37 - compiled 11/06/2010

CPU: AMCC PPC440EP 1.3 @ 799 Mhz
Caches Sizes: L1: 32 KB - L2: none - L3: none
Cache Line: 128

---> CPU <---
MAX MIPS: 1599

---> L1 <---
READ32: 2857 MB/Sec
READ64: 5669 MB/Sec
WRITE32: 2868 MB/Sec
WRITE64: 5702 MB/Sec

---> RAM <---
READ32: 299 MB/Sec
READ64: 299 MB/Sec
WRITE32: 166 MB/Sec
WRITE64: 165 MB/Sec
WRITE: 906 MB/Sec (Tricky)

---> VIDEO BUS <---
READ: 32 MB/Sec
WRITE: 50 MB/Sec

Quote:

ok baby here'e the reulat after the 2'nd half of the update from aCubes webiste:

RAGEMEM v0.37 - compiled 11/06/2010

CPU: AMCC PPC440EP 1.3 @ 799 Mhz
Caches Sizes: L1: 32 KB - L2: none - L3: none
Cache Line: 128

---> CPU <---
MAX MIPS: 1598

---> L1 <---
READ32: 2852 MB/Sec
READ64: 5666 MB/Sec
WRITE32: 2863 MB/Sec
WRITE64: 5691 MB/Sec

---> RAM <---
READ32: 298 MB/Sec
READ64: 298 MB/Sec
WRITE32: 165 MB/Sec
WRITE64: 165 MB/Sec
WRITE: 894 MB/Sec (Tricky)

---> VIDEO BUS <---
READ: 29 MB/Sec *** was 14 MB/Sec *** (107% increase)
WRITE: 63 MB/Sec *** was 50 MB/Sec *** (26% increase)


man I'm happy I started this thread !!! big thanks to Crisot and my buddies at ACube (ti voglio bene asai)

@328gts

John, what gfx card do you use? Because I can see you have WRITE: 63MB/sec, while mine is still the same!?!

@Phantom

I've got a Radeon 9250 with 128 Mb...did you make sure to install the first part before installing the PCI Update iso ?

@328gts

Doh... didn't notice the PCI_Update tool. I thought that it was for Sam440_Setup tool.

@Phantom

hehe it happens....now go get it & have fun

@328gts

Here is mine then:

Quote:

Perfect, but I see a slight decrease in VIDEO BUS (READ). Before with the Sam440ep_Setup tool went to 32 MB/sec and now to 29 MB/sec. Is that normal?

@Phantom

same as me but I figure its worht the 26% increase in write speeds so it's a definite improvement overall

Of my Sam440ep-flex:

*** Before Any Patch ***

--- RAGEMEM v0.37 ---

CPU: AMCC PPC440EP 1.3 @ 799 Mhz
Caches Sizes: L1: 32 KB - L2: none - L3: none
Cache Line: 128

---> CPU <---
MAX MIPS: 1598

---> L1 <---
READ32: 2857 MB/Sec
READ64: 5668 MB/Sec
WRITE32: 2862 MB/Sec
WRITE64: 5699 MB/Sec

---> RAM <---
READ32: 298 MB/Sec
READ64: 298 MB/Sec
WRITE32: 165 MB/Sec
WRITE64: 165 MB/Sec
WRITE: 890 MB/Sec (Tricky)

---> VIDEO BUS <---
READ: 14 MB/Sec
WRITE: 50 MB/Sec


*** After 1st Patch (video-read) ***

--- RAGEMEM v0.37 ---

CPU: AMCC PPC440EP 1.3 @ 799 Mhz
Caches Sizes: L1: 32 KB - L2: none - L3: none
Cache Line: 128

---> CPU <---
MAX MIPS: 1598

---> L1 <---
READ32: 2857 MB/Sec
READ64: 5676 MB/Sec
WRITE32: 2868 MB/Sec
WRITE64: 5707 MB/Sec

---> RAM <---
READ32: 298 MB/Sec
READ64: 298 MB/Sec
WRITE32: 165 MB/Sec
WRITE64: 165 MB/Sec
WRITE: 891 MB/Sec (Tricky)

---> VIDEO BUS <---
READ: 32 MB/Sec
WRITE: 50 MB/Sec


--- Cube ---

7152 frames drawn in 15.8 seconds
704 fps (1.419 milliseconds per frame)
457 fps (2.188 milliseconds per frame with swap)


--- SDL-bench ---

Pitch = 320
Hardware surfaces avail = 1
Window manager avail = 1
Blitter hardware = 1
Colorkey blit hardware = 0
Alpha blit hardware = 0
Software->Hardware accel = 0
Video memory = 0

Resolution: 320x240 / 320x240 / 640x480 / 640x480
Type: software / hardware / software / hardware
Slow points (frames/sec): 2.43457 / 80 / 0.324333 / 30.888
Fast points (frames/sec): 94.1869 / 83.5782 / 23.5706 / 21.36
Rect fill (rects/sec): 7447.27 / 69423.7 / 1831.84 / 43574.5
32x32 blits (blits/sec): 22260.9 / 78769.2 / 16650.4 / 78769.2


*** After Both Patches (PCI patch) ***

--- RAGEMEM v0.37 ---

CPU: AMCC PPC440EP 1.3 @ 799 Mhz
Caches Sizes: L1: 32 KB - L2: none - L3: none
Cache Line: 128

---> CPU <---
MAX MIPS: 1598

---> L1 <---
READ32: 2858 MB/Sec
READ64: 5670 MB/Sec
WRITE32: 2870 MB/Sec
WRITE64: 5704 MB/Sec

---> RAM <---
READ32: 298 MB/Sec
READ64: 298 MB/Sec
WRITE32: 165 MB/Sec
WRITE64: 165 MB/Sec
WRITE: 894 MB/Sec (Tricky)

---> VIDEO BUS <---
READ: 29 MB/Sec
WRITE: 63 MB/Sec


--- Cube ---

7428 frames drawn in 16.6 seconds
713 fps (1.402 milliseconds per frame)
453 fps (2.204 milliseconds per frame with swap)


--- SDL-bench ---

Pitch = 320
Hardware surfaces avail = 1
Window manager avail = 1
Blitter hardware = 1
Colorkey blit hardware = 0
Alpha blit hardware = 0
Software->Hardware accel = 0
Video memory = 0

Resolution: 320x240 / 320x240 / 640x480 / 640x480
Type: software / hardware / software / hardware
Slow points (frames/sec): 2.9873 / 97.561 / 0.40034 / 41.2371
Fast points (frames/sec): 100.313 / 105.785 / 25.0416 / 26.675
Rect fill (rects/sec): 8885.03 / 52512.8 / 2140.02 / 49349.4
32x32 blits (blits/sec): 31507.7 / 97523.8 / 22505.5 / 93090.9

@Marko

nice comparison Marko..thanks

@Akiko

Would it be possible to do a SysSpeed benchmark ?

Amiga 4000T, CSPPC@233Mhz, mediator

It would be interesting to compare MIPS results of this benchmark program and classic systems MIPS benchmarks.

Do we have the source code of SysSpeed ?

Would be nice to run on OS4 systems and create a final bridge of benchmarks from classic machines to PPC.

The holy grail of Amiga benchmarks :
http://amiga.resource.cx/perf/sysspeed.html

@m3x

What i don't understand is:

With Sam Setup only
READ: 32 MB/Sec

After both patches (PCI and Sam Setup)
READ: 29 MB/Sec

Why we lost 3 MB/S ?

@samo79

I can't explain you why, but I can assure you this won't change anything. To be honnest, I'm not sure going from 25 MB/sec to 250 MB/sec will make a real difference.

Video memory is "never" read.

EDIT: Ho, well, on software like SREC, sure this value will make a hudge difference, since it's raw video memory reading... Appart from that...

RAGEMEM v0.37 - compiled 11/06/2010

CPU: AMCC PPC440EP 1.3 @ 666 Mhz
Caches Sizes: L1: 32 KB - L2: none - L3: none
Cache Line: 128

---> CPU <---
MAX MIPS: 1323

---> L1 <---
READ32: 2448 MB/Sec
READ64: 4867 MB/Sec
WRITE32: 2457 MB/Sec
WRITE64: 4896 MB/Sec

---> RAM <---
READ32: 277 MB/Sec
READ64: 277 MB/Sec
WRITE32: 165 MB/Sec
WRITE64: 165 MB/Sec
WRITE: 907 MB/Sec (Tricky)

---> VIDEO BUS <---
READ: 28 MB/Sec
WRITE: 63 MB/Sec

RAGEMEM v0.37 - compiled 11/06/2010

CPU: AMCC PPC440EP 1.3 @ 666 Mhz
Caches Sizes: L1: 32 KB - L2: none - L3: none
Cache Line: 128

---> CPU <---
MAX MIPS: 1332

---> L1 <---
READ32: 2471 MB/Sec
READ64: 4934 MB/Sec
WRITE32: 2483 MB/Sec
WRITE64: 4947 MB/Sec

---> RAM <---
READ32: 279 MB/Sec
READ64: 300 MB/Sec
WRITE32: 165 MB/Sec
WRITE64: 165 MB/Sec
WRITE: 909 MB/Sec (Tricky)

---> VIDEO BUS <---
READ: 28 MB/Sec
WRITE: 63 MB/Sec

The two patches did make a difference! Before, videos above 640x480 were jerky but now I can play DVD resolution smoothly using DvPlayer. Also, demos and games under E-UAE are noticeably faster now.

@trixie

Thanks for remind me about videos, I completely forgot to test them with DVPlayer and MPlayer with both fixes.

@trixie

Quote:

I just posted this in the News comments, but it also seems to fit here.

Regarding MPlayer and DVplayer.
I have no idea why, but neither player would present a DVD playback without extreme
frame skipping and voice way out of sync while using the standard CD/DVD connection
of the 440ep/667MHz. To get decent playback the SATA cable had to be plugged into
the connector under the HD standard connector (port 1 in MPlayer GUI).

Those problems, and others, are now gone after doing just the pci-mini-update. The
sam440ep_setup has also added to the performance of the Sam.

ahh I miss this thread!..ok 460ex owners let's get some results posted here