Yeah, the documentation is minimal as is the error reporting (although the Installer script is quite good). That error probably means it can't contact the printer.
What sort of printer is it? If it's a newish one it may well support IPP natively, in which case the details you need will be in the web interface on the printer.
If not, you'll need to install CUPS on a Linux box, set that up so it can print, and also set "share printers" and "remote admin" in the server settings.
Then you can go to http://printserver:631/printers - that will show all the printers, the whole printer URL you need to give ipp.device is the URL behind the link for whatever the printer is.
If it's an HP printer, apparently the URL should be http://169.254.15.2:631/ipp/port1 (with your printer's IP address in place of that one of course)
Yeah, the documentation is minimal as is the error reporting (although the Installer script is quite good). That error probably means it can't contact the printer.
What sort of printer is it? If it's a newish one it may well support IPP natively, in which case the details you need will be in the web interface on the printer.
Nope, it's a HP Laserjet 5L Centronics. I have it plugged to a FritzBox 7240 through an USB to Centronics adapter. Not even the router tells me there is a printer by name installed, it just says "Prolific Technology Inc. IEEE-1284 Controller USB-Drucker", still it works when sending the data RAW through lpr (at least it did)
Quote:
If not, you'll need to install CUPS on a Linux box, set that up so it can print, and also set "share printers" and "remote admin" in the server settings.
Then you can go to http://printserver:631/printers - that will show all the printers, the whole printer URL you need to give ipp.device is the URL behind the link for whatever the printer is.
That's unfortunately no option for me
Quote:
If it's an HP printer, apparently the URL should be http://169.254.15.2:631/ipp/port1 (with your printer's IP address in place of that one of course)
I take it you mean "new" HP printers here? Because with this method i get the same "error".
Hmm, i'll need to install the Centronics LAN/WLAN print server again i have lying around here...iirc it was able to give a name to the installed printer.
It's a Trendnet TEW-P1PG
Will see if that one helps.
Thank you for the info and heads up, Chris
EDIT: Gone back to lpr printing (now over the Trendnet printserver - need to check if the crashes i get are maybe caused by the not 100% supported USB adapter - two test pages didn't bring up a crash at least).
IPP is said to work with the Trendnet but it's not, at least not internally, i get a "Function not supported" or similar when trying to browse to print.server:631/printers/printer-name.
I also tried lpd from ssolie, but ... i dunno what to do, i installed it as internet server...but then what? Where do i send the print jobs? The documentation on this one is even worse than the ipp one for a linux/printing noob like me... (sorry Steven)
Raziel wrote: Nope, it's a HP Laserjet 5L Centronics. I have it plugged to a FritzBox 7240 through an USB to Centronics adapter. Not even the router tells me there is a printer by name installed, it just says "Prolific Technology Inc. IEEE-1284 Controller USB-Drucker", still it works when sending the data RAW through lpr (at least it did)
I can't find any mention of IPP in the FritzBox manual.
Quote:
Quote:
If it's an HP printer, apparently the URL should be http://169.254.15.2:631/ipp/port1 (with your printer's IP address in place of that one of course)
I take it you mean "new" HP printers here? Because with this method i get the same "error".
Yes, ones with an internal JetDirect.
Quote:
IPP is said to work with the Trendnet but it's not, at least not internally, i get a "Function not supported" or similar when trying to browse to print.server:631/printers/printer-name.
No mention of it in the manual, and a webpage with specifications on didn't mention it either.
Quote:
I also tried lpd from ssolie, but ... i dunno what to do, i installed it as internet server...but then what? Where do i send the print jobs? The documentation on this one is even worse than the ipp one for a linux/printing noob like me... (sorry Steven)
No idea. I think I tried it once and didn't get anywhere.
IPP is said to work with the Trendnet but it's not, at least not internally, i get a "Function not supported" or similar when trying to browse to print.server:631/printers/printer-name.
No mention of it in the manual, and a webpage with specifications on didn't mention it either.
Yes, the Trendnet itself has a "Network" page within it's web config, showing IPP as part of the print job lists...this is how it looks like, so i thought it's supported internally (but as i found it's not):
Quote:
TCP/IP Printing LPR Printing Status : Running Total Print Jobs : 0 Total Print Size : 0 KBytes
Port (9100) Printing Status : Running Total Print Jobs : 0 Total Print Size : 0 KBytes
IPP Printing Status : Running Total Print Jobs : 0 Total Print Size : 0 KBytes
FTP Printing Status : Running Total Print Jobs : 0 Total Print Size : 0 KBytes
E-mail Printing Status : Running Total Print Jobs : 0 Total Print Size : 0 KBytes
Well, here's hoping that the driver development from the start of this thread goes over the finish line
328gts wrote: Trying to set up my old HP LaserJet 1012 printer via USB on my Samflex but keep getting an error when I try to select usbprinter.device on Unit0?
Update: Feb 2013- starting at post 231, Terminills is working on getting glutenprint working on AROS & then hopefully on OS3.x & OS4.X. So far I've got text AND graphics printing out on my DOT4 printer & I've never got this far with either AmigaOS4.1 or AROS before
If you can help out just chime in
@ rwo
mate we can use you here again
qnd ixemul version of gutenprint will be released for testing this weekend
328gts wrote: Trying to set up my old HP LaserJet 1012 printer via USB on my Samflex but keep getting an error when I try to select usbprinter.device on Unit0?
Update: Feb 2013- starting at post 231, Terminills is working on getting glutenprint working on AROS & then hopefully on OS3.x & OS4.X. So far I've got text AND graphics printing out on my DOT4 printer & I've never got this far with either AmigaOS4.1 or AROS before
If you can help out just chime in
@ rwo
mate we can use you here again
qnd ixemul version of gutenprint will be released for testing this weekend
Aros68k, 3.1 and 4.0 all seem to be able to run the ixemul version fine.
328gts wrote: Trying to set up my old HP LaserJet 1012 printer via USB on my Samflex but keep getting an error when I try to select usbprinter.device on Unit0?
Update: Feb 2013- starting at post 231, Terminills is working on getting glutenprint working on AROS & then hopefully on OS3.x & OS4.X. So far I've got text AND graphics printing out on my DOT4 printer & I've never got this far with either AmigaOS4.1 or AROS before
If you can help out just chime in
@ rwo
mate we can use you here again
qnd ixemul version of gutenprint will be released for testing this weekend
Aros68k, 3.1 and 4.0 all seem to be able to run the ixemul version fine.
Trying to figure out why there is a crash on exit. Might have to drop the ixemul version and just work on finishing removing dependencies(waiting for more tests tho.).
well my old trusty LaserJet 1012 finally broke down on me after all these years so I'm hoping I can get my HP LaserJet 2600n working with AOS either via USB or network (ethernet) via gutenprint
328gts wrote: Trying to set up my old HP LaserJet 1012 printer via USB on my Samflex but keep getting an error when I try to select usbprinter.device on Unit0?
Update: Feb 2013- starting at post 231, Terminills is working on getting glutenprint working on AROS & then hopefully on OS3.x & OS4.X. So far I've got text AND graphics printing out on my DOT4 printer & I've never got this far with either AmigaOS4.1 or AROS before
If you can help out just chime in
@ rwo
mate we can use you here again
qnd ixemul version of gutenprint will be released for testing this weekend
Aros68k, 3.1 and 4.0 all seem to be able to run the ixemul version fine.
Trying to figure out why there is a crash on exit. Might have to drop the ixemul version and just work on finishing removing dependencies(waiting for more tests tho.).
328gts wrote: Trying to set up my old HP LaserJet 1012 printer via USB on my Samflex but keep getting an error when I try to select usbprinter.device on Unit0?
Update: Feb 2013- starting at post 231, Terminills is working on getting glutenprint working on AROS & then hopefully on OS3.x & OS4.X. So far I've got text AND graphics printing out on my DOT4 printer & I've never got this far with either AmigaOS4.1 or AROS before
If you can help out just chime in
@ rwo
mate we can use you here again
qnd ixemul version of gutenprint will be released for testing this weekend
Aros68k, 3.1 and 4.0 all seem to be able to run the ixemul version fine.
Trying to figure out why there is a crash on exit. Might have to drop the ixemul version and just work on finishing removing dependencies(waiting for more tests tho.).
DSI is fixed ;D
And now ghostscript is attempting to communicate with gutenprint. :)
although my ol trust LaserJet 1012 finally kicked the bucket I've got a nice ColorJet 2600n hooked up to my router that needs some lovin from my X1000 & Aros netbook
News feed
OS4 Feedback forum
OS4Depot Feedback forum
Amigabounty forum
OpenAmiga forum
AmiCygnix forum
ABC shell forum
AmiKit forum
Cinnamon Writer forum
CodeBench forum
Digital Universe forum
Dopus 5 forum
E-UAE forum
Gnash forum
Ibrowse forum
JAmiga forum
Odyssey forum
OWB forum
Qt forum
SmartFileSystem forum
Timberwolf forum
TouchDevice forum
TuneNet forum
Unsatisfactory Software forum
Donate
