Got this DVD for my daughter at Christmas, its one of the new films by Warner Bros. I loved Scooby Doo as a Kid and just to let you know that if you are a scooby doo fan, this one hits the funny bone.
It has a few nods to 'pirates of the carribean' and overall, its good, clean family fun without that awful, Scrappy Doo. (thank god they killed him off)
Recommended.

EDIT: I posted this because the creator of Scooby Doo, Iwao Takamoto, died today. Story Here

@Jack

Sorry, I can't find the table I drew up some years ago. I can't even remember where I got the info from, but I do remember changing the switches and reading the CPU speed from U-Boot output.

If I find it in the near future, I'll send it to you. It's not the sort of thing to post in public, because some people might try it just for fun and break something.

@Mikey_C

It already supports fullscreen. Just go into options and enable it.

[edit]

Some interesting "debug" output:

Datadir: data/supertux
Warning: Could not open joystick -1.
The Simple DirectMedia error that occured was:
There are 5 joysticks available

AFAIK I have only 1 joystick connected. Maybe a problem with the SDL it uses.

@ToAks

My daughter loves SuperTux, can't get her away from it! Any chance of implementing full screen instead of window?

Cheers

Mikey C

@R-TEAM

Quote:

R-TEAM wrote:
Hi,

@Swoop

by me [A4000-060/66 and CGFX4 OS3.9.3+] the colorbox
is NOT updated in realtime [same as post #7] .. maybe
a MUI problem with GFX card screens ?

R-TEAM

I have just tried this out on my A1200, and the box updates in real time, as you change the parameters.

I have just tried again on my A1 with 'Blitzen' running but that made no difference, either.

@spotUP

maybe u have the time to celebrate this new sdl by porting the new SuperTux update? (its a major update too).

I would have done it if i had the time, anyway i will do it asap if you wont but that may take a while :I

anyway, thanks to Evil Rich for the SDL update!

@Severin

I've made bootable CDs with MakeCD. Heres the tutorial on IntuitionBase.

boot cd

Hey!

Nice improvement! The page looks great!



PJS

@ssolie

I added DEBUG to my interface tonight. With DEBUG turned on the network connection works perfect with 0% packet loss. As soon as I remove DEBUG I get 30-40% packet loss and some hard lockups. I'm not getting as many tonight but I do get the packet loss every time.

I am seeing the duplicate DNS servers both when the interface is working and when it is having problems.

My sniffer isn't working. I think the ethernet ports on my router are switched so I'm not seeing most of the traffic. I'll try to borrow an old hub tomorrow.

Here is the debug output but like I said, it works with debug on:

08-Jan-07 21:58:53 [Debug] Unknown Interface 'interface' hardware address = 00:09:D2:28:03:06.
08-Jan-07 21:58:54 [Debug] Unknown Setting up BOOTP packet for 'interface' with hardware address 00:09:D2:28:03:06.
08-Jan-07 21:58:54 [Debug] Unknown Sent initial DHCPDISCOVER request for 'interface'; transaction ID=0x1ECAEF31, retry timeout=0:00:05 hours, allocation timeout=0:01:00 hours.
08-Jan-07 21:58:59 [Debug] Unknown DHCP retry timeout for 'interface' has elapsed.
08-Jan-07 21:58:59 [Debug] Unknown Setting up BOOTP packet for 'interface' with hardware address 00:09:D2:28:03:06.
08-Jan-07 21:58:59 [Debug] Unknown Resent DHCPDISCOVER request for 'interface'; transaction ID=0x78B9F369, retry timeout=0:00:08 hours.
08-Jan-07 21:58:59 [Debug] Unknown Received BOOTP/DHCP server message for 'interface'.
08-Jan-07 21:58:59 [Debug] Unknown Picking up BOOTP/DHCP server message for 'interface'.
08-Jan-07 21:58:59 [Debug] Unknown Configuration information for 'interface': Server identifier = 192.168.0.1.
08-Jan-07 21:58:59 [Debug] Unknown Setting up BOOTP packet for 'interface' with hardware address 00:09:D2:28:03:06.
08-Jan-07 21:58:59 [Debug] Unknown Setting up DHCP packet for 'interface' with transaction ID = 0x78B9F369, server address = 192.168.0.1, client address = 192.168.0.105.
08-Jan-07 21:58:59 [Debug] Unknown Responding to DHCP offer; sent DHCPREQUEST request for 'interface'; transaction ID=0x78B9F369, retry timeout=0:00:03 hours.
08-Jan-07 21:58:59 [Debug] Unknown Received BOOTP/DHCP server message for 'interface'.
08-Jan-07 21:58:59 [Debug] Unknown Picking up BOOTP/DHCP server message for 'interface'.
08-Jan-07 21:58:59 [Debug] Unknown Server has responded to address allocation request for 'interface'. Suggested IP address is 192.168.0.105.
08-Jan-07 21:58:59 [Debug] Unknown Checking if the IP address 192.168.0.105 proposed for 'interface' is already in use.
08-Jan-07 21:58:59 [Debug] Unknown Configuration information for 'interface': Server hardware address = 00:13:46:C0:93:54.
08-Jan-07 21:59:01 [Debug] Unknown IP address verification timeout for 'interface' has elapsed.
08-Jan-07 21:59:01 [Debug] Unknown Configuration information for 'interface': Server identifier = 192.168.0.1.
08-Jan-07 21:59:01 [Debug] Unknown Configuration information for 'interface': Subnet mask = 255.255.255.0.
08-Jan-07 21:59:01 [Debug] Unknown Configuration information for 'interface': Address lease time = 7 day(s), 0:00:00 hour(s).
08-Jan-07 21:59:01 [Debug] Unknown Configuration information for 'interface': Router = 192.168.0.1.
08-Jan-07 21:59:01 [Debug] Unknown Configuration information for 'interface': Domain name system server = 192.168.0.1.
08-Jan-07 21:59:01 [Debug] Unknown Binding address of 'interface'.
08-Jan-07 21:59:01 [Debug] Unknown Configuration information for 'interface': Server identifier = 192.168.0.1.
08-Jan-07 21:59:01 [Debug] Unknown Configuration information for 'interface': Server IP address = 192.168.0.1.
08-Jan-07 21:59:01 [Debug] Unknown Setting interface 'interface' address to 192.168.0.105.
08-Jan-07 21:59:01 [Debug] Unknown Setting interface 'interface' net mask to 255.255.255.0.
08-Jan-07 21:59:01 [Debug] Unknown Interface 'interface' IP address is now set to 192.168.0.105/255.255.255.0.
08-Jan-07 21:59:02 [Debug] Unknown Interface 'interface' address successfully changed to 192.168.0.105/255.255.255.0.

Hi,

@Swoop

by me [A4000-060/66 and CGFX4 OS3.9.3+] the colorbox
is NOT updated in realtime [same as post #7] .. maybe
a MUI problem with GFX card screens ?

R-TEAM

@pvanni

Quote:

Unfortunatley, the solid colour box should be updated in real time as you change the options in that window, and even putting DrawStudio on the Blacklist doesn't improve it. So it's not a JIT emulator problem.

depends on the project.
i always try to build a newlib build first, if that fails,
i try a clib2 build. answer, both are prefered, so install both.

@PEB

If you have a chooce use newlib as its faster and smaller exe's.. but clib2 have more functions so thats why more linux ports use clib2

RWO

@spotUP

Which is preferable: the clib2 or the newlib build?

Evil Rich has updated SDL!

The latest SDL (v1.2.11) can be found at this url:
http://www.rcdrummond.net/sdl/index.html

a small error (if you don't intend to use crosscompilers)
change the paths in the libSDL.la files to
/SDK/Local/newlib/lib and /SDK/Local/clib2/lib

Thank you very very much for this one Rich!
I am putting it through some tests right now! :D

There's also path errors in:
/SDK/Local/Newlib/bin/sdl-config
/SDK/Local/Clib2/bin/sdl-config

change:
prefix=/usr/local/amiga/ppc-amigaos/SDK/local/clib2
prefix=/usr/local/amiga/ppc-amigaos/SDK/local/newlib

to:
prefix=/SDK/local/clib2
prefix=/SDK/local/newlib

that should fix it.

@Reaps
Quote:
I still don't think this is a h/w problem but I do think certain h/w configurations cause it to show up more often than others.

The whole duplicate DNS entry thing is a very good clue I think...

@BobW

I made a post on AW about this exact problem that I'm having with my A1XE with a 750FX and its not DHCP from a router, but DHCP from a SuSE 10.2 linux box.

Edit: This was the post... I'm working around it by setting a static address.

@Mikey_C
I wonder if Troika will keep the name 'Amy' in the end. I imagine they'll drop the 05 bit for obvious reasons. I'd prefer "Amy 5000" myself.

@mr_homm

Quote:

I had the same issue with pre3 on A1X\EG4. Reported it to Friedens then and went static. The other side of the cable was a switch.


Jack

@Mikey_C

Am I the only one who appreciated the joke?