Wordworth7 fonts

I did copy my Wordworth 7 drawer from SAM 440 to SAM460

The fonts do not appear however.
Installfonts told me the install of WW was not correct,

i did
setenv Wordworth/WwFonts SAVE WWFontsPath
and i could go on

I chose to renew the *NFontlist , so my UFST drawer was emptied, and chose the Inellifont drawer as font drawer to add.
The UFST drawer was filled as expected,but WW7 still cannot see these fonts.
In my WW7 settings/text i checked all all types of fonts to be displayed, but just see one


Q: Were can i check that *Nfontlist ? Found it in WWFonts/UFST drawer
What else can i check ?

My intelifont drawer only has the following in it:

> dir Wordworth7/WwFonts/Intellifont/
if.dsc if.fnt libinfo.dsc plugin.tyq ShannonBook.type

Only one font file.

As wordworth is a digita product do you have all it's fonts in your sys:fonts drawer?

> dir fonts:digita*
WB42:Fonts/DigitaSans (dir)
WB42:Fonts/DigitaBold (dir)
DigitaBold.font DigitaSans.font

@Severin


No, but that was also the case in my previous installs, i did copy the fonts in the WWFonts drawer, as told in the WW6 & WW7 Readme's
I progressed a bit,
I think it has to do with fontcache

Just before WW7 complains about digitaintellifont library
i get the following Snoopy trace

00534 : Ww1 : o.k. = [exec] OpenLibrary("digitaintellifont.library",2) [547uS]
00535 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x5F2043F6,200,0x00000000) [248uS]
00536 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x5F2044F6,200,0x00000000) [208uS]
00537 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontCacheSize",SHARED) [54uS]
00538 : Ww1 : FAIL = GetVar("Wordworth/FontCacheSize",0x60FD179C,20,0x00000000) [231uS]
00539 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontBufSize",SHARED) [41uS]
00540 : Ww1 : FAIL = GetVar("Wordworth/FontBufSize",0x60FD179C,20,0x00000000) [211uS]
00541 : Ww1 : FAIL = Open("Stock:Backup_Datas/teksten/WordWorth7/WWFonts/UFST/if.fnt",OLD) = [0x00000000] [95uS]
00542 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontPath0",SHARED) [42uS]
00543 : Ww1 : FAIL = GetVar("Wordworth/FontPath0",0x60FD14A8,256,0x00000000) [220uS]
00544 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontPath1",SHARED) [40uS]
00545 : Ww1 : FAIL = GetVar("Wordworth/FontPath1",0x60FD14A8,256,0x00000000) [201uS]
00546 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontPath2",SHARED) [42uS]
00547 : Ww1 : FAIL = GetVar("Wordworth/FontPath2",0x60FD14A8,256,0x00000000) [205uS]
00548 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontPath3",SHARED) [40uS]
00549 : Ww1 : FAIL = GetVar("Wordworth/FontPath3",0x60FD14A8,256,0x00000000) [203uS]
00550 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontPath4",SHARED) [41uS]
00551 : Ww1 : FAIL = GetVar("Wordworth/FontPath4",0x60FD14A8,256,0x00000000) [204uS]
00552 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontPath5",SHARED) [42uS]
00553 : Ww1 : FAIL = GetVar("Wordworth/FontPath5",0x60FD14A8,256,0x00000000) [208uS]
00554 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontPath6",SHARED) [42uS]
00555 : Ww1 : FAIL = GetVar("Wordworth/FontPath6",0x60FD14A8,256,0x00000000) [206uS]
00556 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontPath7",SHARED) [41uS]
00557 : Ww1 : FAIL = GetVar("Wordworth/FontPath7",0x60FD14A8,256,0x00000000) [238uS]
00558 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontPath8",SHARED) [44uS]
00559 : Ww1 : FAIL = GetVar("Wordworth/FontPath8",0x60FD14A8,256,0x00000000) [215uS]
00560 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontPath9",SHARED) [40uS]
00561 : Ww1 : FAIL = GetVar("Wordworth/FontPath9",0x60FD14A8,256,0x00000000) [206uS]
00562 : Wordworth : CurrentDir("<untracked>")

I am looking at Documentation/Fonts.Doc now


It seems that an assign to fonts (add might help?

@JosDuchIt

Actually that library is read in correct

00534 : Ww1 : o.k. = [exec] OpenLibrary("digitaintellifont.library",2) [547uS]

Where it starts to fail is to read in ENVARC vars, which it can't find either in ENVARC nor in your Wordworth dir

00537 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontCacheSize",SHARED) [54uS]
00538 : Ww1 : FAIL = GetVar("Wordworth/FontCacheSize",0x60FD179C,20,0x00000000) [231uS]
00539 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontBufSize",SHARED) [41uS]
00540 : Ww1 : FAIL = GetVar("Wordworth/FontBufSize",0x60FD179C,20,0x00000000) [211uS]

Then it fails on reading the file Severin pointed out

00541 : Ww1 : FAIL = Open("Stock:Backup_Datas/teksten/WordWorth7/WWFonts/UFST/if.fnt",OLD) = [0x00000000] [95uS]

and finally it starts to look for a var that holds the font path and adds numbers to that var to be able to check more possibble vars (i think)

So, maybe check if you got a "fontpath" envvar for wordworth first?

00542 : ENV/env-handler 53.2 : FAIL = Lock("ENVARC:Wordworth/FontPath0",SHARED) [42uS]

@Raziel

I don'thave the Wordworth/Fontpath variable on my 460 system, but then i don't have them either on my 440ep system, where Wordworth7 works OK


Here is what happens there after opeing the digitaintellifont.library

0125 : Ww1 : o.k. = [exec] OpenLibrary("digitaintellifont.library",2) [1819uS]
00126 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x58C13B16,200,0x00000000) [480uS]
00127 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x58C13C16,200,0x00000000) [495uS]
00128 : ENV/env-handler 52.2 : FAIL = Lock("ENVARC:Wordworth/FontCacheSize",SHARED) [110uS]
00129 : Ww1 : FAIL = GetVar("Wordworth/FontCacheSize",0x57CEB79C,20,0x00000000) [542uS]
00130 : ENV/env-handler 52.2 : FAIL = Lock("ENVARC:Wordworth/FontBufSize",SHARED) [95uS]
00131 : Ww1 : FAIL = GetVar("Wordworth/FontBufSize",0x57CEB79C,20,0x00000000) [513uS]
00132 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/UFST/if.fnt",OLD) = [0x16398262] [254uS]
00133 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/UFST/uif.ss",OLD) = [0x16398262] [240uS]
00134 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/UFST/utt.ss",OLD) = [0x16398262] [239uS]
00135 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x57CEB98C,200,0x00000000) [498uS]
00136 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x58C13B16,200,0x00000000) [469uS]
00137 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x58C13C16,200,0x00000000) [495uS]
00138 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x58C13C16,200,0x00000000) [452uS]
00139 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/Intellifont/ShannonBook.type",OLD) = [0x16398262] [236uS]
00140 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/UFST/uif.ss",OLD) = [0x16398262] [225uS]
00141 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/UFST/utt.ss",OLD) = [0x16398262] [242uS]
00142 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/Intellifont/ShannonBook.type",OLD) = [0x16398262] [240uS]
00143 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/Intellifont/ShannonBook.type",OLD) = [0x16398262] [240uS]
00144 : Ww1 : o.k. = Open("FONTS:WW_PS_Palatino",OLD) = [0x16398298] [282uS]
00145 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x57CEB940,200,0x00000000) [495uS]
00146 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x58C13B16,200,0x00000000) [498uS]
00147 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x58C13C16,200,0x00000000) [515uS]
00148 : Ww1 : o.k. = GetVar("Wordworth/WwFonts",0x58C13C16,200,0x00000000) [474uS]
00149 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/Intellifont/ShannonBook.type",OLD) = [0x16398298] [201uS]
00150 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/Intellifont/plugin.tyq",OLD) = [0x16398298] [240uS]
00151 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/Intellifont/plugin.tyq",OLD) = [0x163982CE] [210uS]
00152 : Ww1 : o.k. = Open("FONTS:WW_PS_Palatino",OLD) = [0x16398304] [291uS]
00153 : Ww1 : o.k. = Open("FONTS:WW_PS_Palatino",OLD) = [0x16398304] [275uS]
00154 : Ww1 : o.k. = Open("FONTS:WW_PS_Palatino",OLD) = [0x16398304] [285uS]
00155 : Ww1 : o.k. = Open("FONTS:WW_PS_Palatino",OLD) = [0x16398304] [270uS]
00156 : Ww1 : o.k. = Open("FONTS:WW_PS_Palatino",OLD) = [0x16398304] [285uS]
00157 : Ww1 : o.k. = Open("FONTS:WW_PS_Palatino",OLD) = [0x16398304] [274uS]
00158 : Ww1 : o.k. = Open("AutoCorrect.txt",OLD) = [0x16398304] [186uS]

I verified there too if i use a multiassign for fonts: that's not the case.

I verified too: there is also a font WW_PS_Palatino", in my sys:fonts drawer & WW_STANDARD_PICA as well


Verified
00132 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/UFST/if.fnt",OLD) = [0x16398262] [254uS]
00133 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/UFST/uif.ss",OLD) = [0x16398262] [240uS]
00134 : Ww1 : o.k. = Open("Datas:Wordworth7/WwFonts/UFST/utt.ss",OLD) = [0x16398262] [239uS]


Those are lacking in my 460 UFST drawer

Added them and tried again,

Snoopy trace: WW7 does not look anymore to the env variables that failed.

Verified my 440 WW7 install.

I get only one font here too PS_Palatino. :((

I have always had the choice of different fonts indeed, here, but then i may not have seen that since i lost my uipdate 6 sys: partition.
I have installednd a saved update5 partition and then installed update 6
Now Wordworth7 was installed ever since i got my SAM 440ep, so that recovery should not play a role i guess.

OK problem solved

I have been making tests for printing Postscript files, forgot to reset printer to previous setting

Resetting the settings for driver to "file" and printmethod to normal, made reappear my fonts