Is there a program for AOS4 that will take still pictures and assemble them into an animation sequence? On Mac OS X, I use Quicktime Pro for this. On my classic Amigas years ago, I used Rend24. Is there a modern Amiga equivalent?
Actually you can even make amiga animations on OS4.x. AdPro and FRED (the frame editor) still work just fine under OS4.x. and Cyberanim should play them back.
For 24 bit, check the docs for mencoder to see if it handles assembly of frames.
mbrantley wrote: Is there a program for AOS4 that will take still pictures and assemble them into an animation sequence? On Mac OS X, I use Quicktime Pro for this. On my classic Amigas years ago, I used Rend24. Is there a modern Amiga equivalent?
ffmpegGUI along with ffmpeg will combine the pictures into a video. There are step by step instruction in the Hints & Tips section of the ffmpegGUI.guide file. You can use MultiRen to easily rename the files sequencially as required by ffmpeg.
Thanks. I've just used ffmpeg to assemble a test animation of the LightWave cow object moving across a black void. :)
My 30 test LW frame images were generated as IFF files, and ffmpeg doesn't seem to load IFF. So I manually converted each to JPEG with ImageFX. Got to figure out how to do that as a batch operation. Or if LW can generate JPEG files. Or it something else can assemble IFF frames into an animation.
Also, seems ffmpeg wants the files numbered like cow9, cow10, cow11. But LW generated cow009, cow010, cow011.
So I downloaded MultiRen and have sent an e-mail to the author asking for a key file. I assume this program can do the renumber for me. For my cow test with the 30 images I just renamed the files manually.
Or maybe LW can generate its numbered frames differently. Will check and see.
mbrantley wrote: @ktadd Also, seems ffmpeg wants the files numbered like cow9, cow10, cow11. But LW generated cow009, cow010, cow011.
Put a number representing the number of digits for the numbering in the input file name between the % and d. For example: cow%3d I believe this will work on your files.
Quote:
So I downloaded MultiRen and have sent an e-mail to the author asking for a key file. I assume this program can do the renumber for me. For my cow test with the 30 images I just renamed the files manually.
Yes, MultiRen will number files sequencially. It's the best program I've seen for renaming files!
As for IFF batch conversion, I'll have to give that some though. I'm sure I have some program to do it but I can't remember off hand. By the way, either jpeg or png files will work with ffmpeg.
For example: cow%3d I believe this will work on your files.
Will give that a try shortly. Thanks.
Quote:
Yes, MultiRen will number files sequencially. It's the best program I've seen for renaming files!
Won't immediately need MultiRen if the above trick works, but then it'll be good to have such a tool in my arsenal.
Quote:
As for IFF batch conversion, I'll have to give that some though. I'm sure I have some program to do it but I can't remember off hand. By the way, either jpeg or png files will work with ffmpeg.
OK. I need to explore ImageFX's capabilities as well. It might even do the abatch conversion itself, but I'm not sure.
Quote:
Are you using ffmpegGUI?
Yeah, and it does remind me a lot of working with the old Rend24. I used that program quite a lot back in the day to assemble frames from LW and Vista Pro into animations.
As for IFF batch conversion, I'll have to give that some though. I'm sure I have some program to do it but I can't remember off hand.
Then you don't have Adpro/FRED?
Quote:
Yeah, and it does remind me a lot of working with the old Rend24. I used that program quite a lot back in the day to assemble frames from LW and Vista Pro into animations.
Ahh...all of those bring back memories.
Do you remember "pegger"? Was principally made to accomodate Lightwave and intercept IFF save and save in .jpg format, working in the background.
btw-if you haven't got Vista Pro running on OS4.x and need instructions (assuming you have any interest), I'll give you the link.
You know, I think I do have ADPro. I have yet to check and see if it runs with AOS4. I take it there's no problem there? I used to use ADPro back in the day and only bought ImageFX upon returning to the Amiga scene in more recent times. Time to get reacquainted with that tool.
I recently got the ImageFX 4.5 Studio manual Kermit Woodall is selling through lulu.com. Time to spend some effort on that, too.
Quote:
Do you remember "pegger"? Was principally made to accomodate Lightwave and intercept IFF save and save in .jpg format, working in the background.
Was never familiar with pegger, as I did everything on the Amiga in IFF back in the day. It's only now I need the jpegs. Is pegger a free program? Would it still work? I think I mentioned having a render to jpeg option in my LW installation. Apparently that plug is either not working or impoperly stored, as I get no save files when using it, whereas I do get IFF images when selecting that and rendering.
Quote:
btw-if you haven't got Vista Pro running on OS4.x and need instructions (assuming you have any interest), I'll give you the link.
I do have it working with the ModePro and FakeBench screen trick. Am able to render to IFF24 and a large resolution with nice results. Gonna have to play with it some more. Also have MakePath and Terraform, all purchased new back in the day. Only problem is that VistaPro freezes the computer upon exit.
Does Scenery Animator work with AOS4? Haven't tried it, but I have that installed on my A2000/060. The results are actually pretty good with ECS screen modes on the old girl. That particular Amiga 2000 has a Personal Animation Recorder in it, as well as a Toaster. Fun, fun stuff. My daughter loves the Kiki wipes.
mbrantley wrote: I might be that ImageFX will do the job, but I need to spend a little time with the manual and experimenting.
ImageFX comes with a companion program called AutoFX which is a GUI for doing batch operations using ARexx. There is an operation to convert IFF to Jpeg.
By the way. ffmpeg v0.6 will read iff files and convert them to jpeg or png but only one file at a time. Just leave ffmpegGUI in it's default setting, then disable the audio setting and set the output fomrat extension to either .jpg or .png. Unfortunatly the %d directive doesn't work with IFF files. Hmm....maybe it's time I finally implemented batch capability in ffmpegGUI.
mbrantley wrote: I might be that ImageFX will do the job, but I need to spend a little time with the manual and experimenting.
ImageFX comes with a companion program called AutoFX which is a GUI for doing batch operations using ARexx. There is an operation to convert IFF to Jpeg.
By the way. ffmpeg v0.6 will read iff files and convert them to jpeg or png but only one file at a time. Just leave ffmpegGUI in it's default setting, then disable the audio setting and set the output fomrat extension to either .jpg or .png. Unfortunatly the %d directive doesn't work with IFF files. Hmm....maybe it's time I finally implemented batch capability in ffmpegGUI.
Hey, Kevin, I didn't realize until just now you are the ffmpgGUI author. That's the beauty of our little Amiga ecosystem: The developers walk among us. When I'm in a Mac forum such as MacNN, my fellow users can be helpful, but I never converse with the folks who actually make things happen. :)
Anyway, yes, I like ffmpegGUI and would warmly embrace any expanded capability with batch operations.
And I'll also check out AutoFX and the other suggestions above. Thanks, everybody!
I am the developer of this programm, on the above website and on OS4depot you can find an old arexx based script with GUI, but I suggest you use the current beta wich is completly redeveloped. The beta works fine and is nearly in release stage, but if you encounter any problems or think some functionallity should be added feel free to contact me at birkenfeld /at/ geobiz /dot/ de.
IBatch can
1) Batchconvert iff images into JPG, PNG, BMP 2) rename/renumber output images (renumberformat is currently only 3digits format (eg. image_001, image_002...) this could be changed/added though.
> srename vid001 places 1 "vid001" renamed as "vid1" "vid002" renamed as "vid2" "vid003" renamed as "vid3" "vid004" renamed as "vid4" "vid005" renamed as "vid5" "vid006" renamed as "vid6" "vid007" renamed as "vid7" "vid008" renamed as "vid8" "vid009" renamed as "vid9" "vid010" renamed as "vid10" "vid011" renamed as "vid11" "vid012" renamed as "vid12"
You know, I think I do have ADPro. I have yet to check and see if it runs with AOS4. I take it there's no problem there?
It's probably a program deserving of its own thread. ADPro and FRED should run on OS4.1. They do on OS4.0. But there are files that need to be substituted and one notable file that needs outright replacing, the IFF loader. Once this is done, you can use modepro to do some amazing things. For example, you can create the crop visual screens to be any resolution you prefer. Again, this is something I can help you with in irc, if you like.
Regarding pegger to catch your IFF saves on the fly and save them in .jpg format instead:
I also have additional info from the goddess of IFX, cecilia, but I haven't inquired yet as to whether it can become a public release. [I need a secretary]
number6 wrote: ADPro and FRED should run on OS4.1. They do on OS4.0. But there are files that need to be substituted and one notable file that needs outright replacing, the IFF loader. Once this is done, you can use modepro to do some amazing things. For example, you can create the crop visual screens to be any resolution you prefer. Again, this is something I can help you with in irc, if you like.
Good to hear. Need to fetch the ADPro installation files from my ailing A4000D, as my floppies are probably long gone. Look forward to eventually getting it working under AOS4.
Quote:
Regarding pegger to catch your IFF saves on the fly and save them in .jpg format instead:
I've seen various uncrippled versions all over the net, so I would say it's still available.
Cool. I may have mentioned in my other thread about LightWave that it appears my LW installation has some sort of jpeg saving plugin called HIIP, but it's not working. There is no output saved when jpeg is selected. As I said, this LW installation has been moved from Amiga to Amiga to Sam over the years, and so I can't even remember installing this plugin or even using it! Suppose I need to look at my Toaster installation DVD (with a version of LW requiring the Toaster card to be present) to see what's there. Got the Toaster with LW working in my A2000/060, by the way. Probably my most capable classic machine right now since my 4000 is down.
Quote:
Quote:
Only problem is that VistaPro freezes the computer upon exit.
From reading the comments in my tutorial thread, it seems to be an issue confined to OS4.1. I never had that issue on OS4.0.
Quote:
Does Scenery Animator work with AOS4?
I have no idea. Most people at the time were posting that they wanted to use VistaPro2, 3, and/or lite, so that's what I took the time to get working.
Thanks for VistaPro guidance given in the other tread. Even though I have Bryce on my Mac and have played with various versions of Vue on PC and Mac, I still like messing with VistaPro and its MakePath associated program.
Quote:
Quote:
I recently got the ImageFX 4.5 Studio manual Kermit Woodall is selling through lulu.com.
You might want to look over at OS4depot, since I can't tell from your post whether you installed IFX or had just received it:
[/quote]
Thanks. Let us know if ceclia will let you share. I do have ImageFX installed on my Sam. I initially bought the program a year or two ago and installed it on my 4000.
News feed
OS4 Feedback forum
OS4Depot Feedback forum
Amigabounty forum
OpenAmiga forum
AmiCygnix forum
ABC shell forum
AmiKit forum
Cinnamon Writer forum
CodeBench forum
Digital Universe forum
Dopus 5 forum
E-UAE forum
Gnash forum
Ibrowse forum
JAmiga forum
Odyssey forum
OWB forum
Qt forum
SmartFileSystem forum
Timberwolf forum
TouchDevice forum
TuneNet forum
Unsatisfactory Software forum
Donate
