I have a problem here.Is that while I try to run roms on ASP spectrum emulator in fullscreen it says the monitor that is out of range.That's indicative that something goes wrong there.
On screens under Workbench/Prefs I defined one 640x480 instead on Picasso 96 it doesn't allow me to define the screen or play with it for roms.
It's an obscure feeling I have that these screens still not run and get a closer crash at it.
On MAME I can happily play on fullscreen mode but I always have to select "smooth scaling" for example on or under scale effect options.
As I am lost on the ice...What can I do to play Spectrum and regulated Metal Works (thats great album by Judas Priest) M.A.M.E. roms?
What I am missing for this games/roms?
Is a question of lucidity or by hability?
Remember that I need a 320x240 and a 320x256 to play MAME and Spectrum roms
Before I end I must ask you: Has anyone similar problems with the WB screenmodes? I am using AmigaOS 4.1 Update 2 under AmigaOne X5000 with a graphics card that is a RAdeon 5450
Thanks
Edited by MamePPCA1 on 2022/2/15 18:46:33 Edited by MamePPCA1 on 2022/2/15 18:47:22
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
You can send me your ideas and post in this thread.
I really need to make some new screenmodes.
Thanks
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
I remember that when I used AmigaOne G4 XE with Radeon 7500 graphics and then Radeon 9000Pro I managed to get 320x256 mode when playing with P96mode. Unfortunately, on Radeons HD I could never do it. However, I do not have a problem with my MAME on my x5000 I just turn on the x2 scaling in the emulator and I have a completely screen. ASP is an old emulator for Amiga 68K, which unfortunately does not have scaling options. Nevertheless, it works quite OK on my x5000 with a Polaris card, simply the screen is surrounded by a thick black frame around.
And I noticed last times that when I run a MAME rom and leave the Amiga for some minutes,again the screen turns black and cannot or musn't get to the rom screen again.
There must be a disfunction or some option of my HKC black monitort and I really need some help
Could it be a question about my 320x256 still not defined MAME screenmode? I noted that on Picasso 96 it can't or musn't be edited.It musn't be again.
What do you think? Is this type editable on Picasso86 or another instance?
@MamePPCA1 As I have already written on new Radeon cards, I have never achieved 320x256 resolution. You can at most 640x512 and in emulators such as MAME or E-UAE set the X2 scaling.
In general, according to the official AMD specification, no Radeon does not operate with a resolution lower than 640x480. However, a long time ago, when I had a AmigaOne G4 XE and the Radeon 7500 card and then Radeon 900Pro could get 320x256 and 320x240 using the P96mode preference. Unfortunately, when I bought x1000 and Radeon HD 6870 it was no longer possible, then I tried with R9 270 and RX560 always without success. In general, P96 Mode has been bad working for some time (you can not use a clock slider), so the only way to create modes are tooltypes in the monitor icon. However, by Tooltypes I could never get such low resolutions even sometime when I had a1 xe. So I'm sorry but I can not help you.
Thank you anyway my friend,I appreciate your efforts and all I want to say is that maybe one day I could get that 320x256 svreenmode defined on Monitors or maybe Picasso96 and I'll be happy with MAME or fuse for instance.
Good luck!
Do you develope something mufa? I would like to start progrsmming for the Amiga.