Samba and Printers

	Bottom Previous Topic Next Topic
Register To Post

Raziel

Samba and Printers

Posted on: 2010/4/26 19:17 #1

Home away from home

How do i set up a printer (Parallel/USB on the AOne) to be visible in the network (Samba), so i can use it from the PC?

I can already access a USB stick on my router as drive and ping both from the PC.
I also have SWAT running and can access it with OWB, but i can't seem to add a working printer.

A step-by-step guide would be nice

Anyone? Mikey?

Thanks in advance

--

game box/art scans
scummvm infrequent builds

Mikey_C

Re: Samba and Printers

Posted on: 2010/4/27 20:21 #2

Amigans Defender

@Raziel

There isn't anything regarding printers for the Amiga. Total Amiga Magazine covered a tutorial once on how to get printing via samba on a Printer attached to a PC (IIRC) You will have to look through the Total Amiga back issues, they are available on PDF somewhere.

Good luck.

Mikey C

No cause is lost if there is but one fool left to fight for it.

Daz

Re: Samba and Printers

Posted on: 2010/4/30 17:08 #3

Just popping in

@Raziel

Quote:

Raziel wrote:
How do i set up a printer (Parallel/USB on the AOne) to be visible in the network (Samba), so i can use it from the PC?

This was possible with LPx (comm/misc I think) I'm not sure if it works under 4.0 as it uses ARexx, and I haven't tried it.

Quote:

A step-by-step guide would be nice

Included in the guide as I recall. I do seem to remember it had trouble printing multiple copies though.

Regards
Darren

Raziel

Re: Samba and Printers

Posted on: 2010/5/1 16:06 #4

Home away from home

@Daz

Great call, exactly what i was looking for

Thanks a lot

--

game box/art scans
scummvm infrequent builds

Raziel

Re: Samba and Printers

Posted on: 2010/5/3 12:26 #5

Home away from home

@all

OK, got a few steps further

Printer is now seen and accessable on the network from the PC

...but

Printing doesn not work with the LPR script as this script only constructs a log file in T: and simply "Copy" the spool file (created from the PC in samba:spools) to the printer (formerly it was PAR:, changed it to PRT: - maybe that is the culprit?)

Unfortunately that files consists of (paste below is a simply text file from OO with three lines of text in differing sizes and fonts)

Quote:

%-12345X@PJL COMMENT HP LaserJet 5L
@PJL SET PAGEPROTECT=ON
@PJL SET RET=ON
@PJL SET ECONOMODE=ON
@PJL SET RESOLUTION=600
@PJL ENTER LANGUAGE=PCL
E*t600R&u600D*r0F&l0O&l1H&l26a8c1E*p0x0Y*c0t5611x8177Y&l1X*b0M*c16534D)s68WD???U ??? Cache 16534XX(16534X&d@*c32E(s5276W???????...

following lots of signs which should be ESC commands and the data i presume.

One can imagine that this sent to the printer via "Copy" only produces garbage and so it is...

Do i need a special command to work with this data?
XP installed its driver and so far everything is working from the PC side, it's the Amiga side that chokes

Of course i will see and search for myself, but any suggestions are very welcome

Thanks

--

game box/art scans
scummvm infrequent builds

Daz

Re: Samba and Printers

Posted on: 2010/5/4 17:17 #6

Just popping in

@Raziel

Quote:

Raziel wrote:
@all

OK, got a few steps further

Printer is now seen and accessable on the network from the PC

...but

Printing doesn not work with the LPR script as this script only constructs a log file in T: and simply "Copy" the spool file (created from the PC in samba:spools) to the printer (formerly it was PAR:, changed it to PRT: - maybe that is the culprit?)

Yes, the PC printer driver generates the output, all the script does is send it to the printer. Using PAR: sends raw data directly to the printer(*), PRT: will feed data through the Amigas printer driver. With this script it should be possible for your PC to print to a printer you don't have an Amiga printer driver for!

(*) if your printer is attached to the Parallel port, I expected to find a similar port for the USB, but can't seem to.

Quote:

Unfortunately that files consists of (paste below is a simply text file from OO with three lines of text in differing sizes and fonts)

Quote:

%-12345X@PJL COMMENT HP LaserJet 5L
@PJL SET PAGEPROTECT=ON
@PJL SET RET=ON
@PJL SET ECONOMODE=ON
@PJL SET RESOLUTION=600
@PJL ENTER LANGUAGE=PCL
E*t600R&u600D*r0F&l0O&l1H&l26a8c1E*p0x0Y*c0t5611x8177Y&l1X*b0M*c16534D)s68WD???U ??? Cache 16534XX(16534X&d@*c32E(s5276W???????...

following lots of signs which should be ESC commands and the data i presume.

Not being an expert.. that looks like PCL - should print if sent directly to the printer.

Regards
Darren

Raziel

Re: Samba and Printers

Posted on: 2010/5/5 7:48 #7

Home away from home

@Daz

Quote:

Daz wrote:
@Raziel

Quote:

Raziel wrote:
@all

OK, got a few steps further

Printer is now seen and accessable on the network from the PC

...but

Printing doesn not work with the LPR script as this script only constructs a log file in T: and simply "Copy" the spool file (created from the PC in samba:spools) to the printer (formerly it was PAR:, changed it to PRT: - maybe that is the culprit?)

Yes, the PC printer driver generates the output, all the script does is send it to the printer. Using PAR: sends raw data directly to the printer(*), PRT: will feed data through the Amigas printer driver. With this script it should be possible for your PC to print to a printer you don't have an Amiga printer driver for!

(*) if your printer is attached to the Parallel port, I expected to find a similar port for the USB, but can't seem to.

[/quote]

Yah, the problem is i have the printer connected to the Amiga and want the PC to send it jobs, not vice-versa

Hmm, you say that when i send this data through PAR: it should be understood by a PCL capable printer as it is done RAW?
Need to check that...

The printer was on the partallel port, i changed it to USB to be able to use it on the upcoming X1000 which iirc doesn't have a serial or parallel port anymore

Quote:

Quote:

Unfortunately that files consists of (paste below is a simply text file from OO with three lines of text in differing sizes and fonts)

Quote:

%-12345X@PJL COMMENT HP LaserJet 5L
@PJL SET PAGEPROTECT=ON
@PJL SET RET=ON
@PJL SET ECONOMODE=ON
@PJL SET RESOLUTION=600
@PJL ENTER LANGUAGE=PCL
E*t600R&u600D*r0F&l0O&l1H&l26a8c1E*p0x0Y*c0t5611x8177Y&l1X*b0M*c16534D)s68WD???U ??? Cache 16534XX(16534X&d@*c32E(s5276W???????...

following lots of signs which should be ESC commands and the data i presume.

Not being an expert.. that looks like PCL - should print if sent directly to the printer.

You are right, it's Printer Command Language (PCL) or Printer Job Language (PJL)
It does not print though

It seems the PRT: device is not the way to go...

Still some fiddling to do then...

Thank you

--

game box/art scans
scummvm infrequent builds

tonyw

Re: Samba and Printers

Posted on: 2010/5/5 11:17 #8

Quite a regular

@Raziel

What if you got yourself one of those network adaptors that plugs into the back of the printer? Those that I have (don't use anymore) convert parallel Centronics to Ethernet, but I'm sure there are others that you could use to convert from your 5L ports to Ethernet.

Then you could leave the printer connected to the LAN and have all PCs and Amigas able to access it from anywhere, without depending on one machine being turned on.

cheers
tony

Raziel

Re: Samba and Printers

Posted on: 2010/5/5 11:58 #9

Home away from home

@tonyw

Hmm, i didn't know those exist...i thought i had to go with a Network printer all the way...humm, must look

Is your adapter a WLAN one?, then i'd take it from you

Thanks for the hint, would also spare me an USB port, if it worked

--

game box/art scans
scummvm infrequent builds

Register To Post
	Top Previous Topic Next Topic

Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )