Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
40 user(s) are online (22 user(s) are browsing Forums)

Members: 0
Guests: 40

more...

Support us!

Headlines

 
  Register To Post  

New Install. Can't get any display. Help, please.
Just popping in
Just popping in


See User information
Hi guys. I've just reinstalled AOS 4.1 update 1. My A1XE has a habit of eating HDD's. Can't wait until the X1000 comes out!

When I come to reboot, I get the splash screen, then - nothing!

When I chose my video resolutions at install, I chose 1280 x 1024 as my max, 'cos my main monitor will handle that but my eyes won't handle anything bigger.

I've tried wiping the system partition and reformatting, then reinstalling with 1024 x 768 as my choice but still nothing.

If I load the CD and run that as a live system, in Monitors / Radion (I've got a 9250) on my System partition it shows my resolutions fine. In Screenmodes, it just shows FakeNative 640 x 400 and Picasso Screenmodes, all of 640 x 400.

If I try and change anything, it obviously wants me to save changes, but then tells me that AOS4 CD is write protected (Obviously, seeing as I'm running the live CD).

Go to top
Re: New Install. Can't get any display. Help, please.
Not too shy to talk
Not too shy to talk


See User information
@OldAmigan

Hi, it might be worth trying to set a lower resolution during install (say 640 x 480) and see if it boot into that screen, then go to prefs and try the resolution you want to run, would try the 'test' function just to make sure all is well!

When you boot from the CD what resolution is that? Might be worth trying that resolution as you know it works okay.

SAM 460 with 2GB or RAM, 1000GB HD, 4 port SATA, DVDRW drive and Radeon HD 4650 GFX card.
Go to top
Re: New Install. Can't get any display. Help, please.
Just can't stay away
Just can't stay away


See User information
When I chose my video resolutions..
What's the hardwires; APG or PCI ?
You maybe missing a connection...
AGP config in UBoot should show -> Enable AGP
If your using a PCI gfx card and it's set in UBoot monitor to PCI. I'm using a ATI Sapphire 9250 PCI.
Default output->Screen(VGA card)
Are you showing active really?
Amiga shell:>nvgetvar
.....
video_num=1
video_activate=pci
.....

What does Ranger show you? It should show a
PCI device:00x5960....etc
Board:0:Radeaon 9250
------
OS4.1.2:Devs/Monitors/Radeon 9250-->40.2 (03/13/2005); defaults
CMPLENGTH=11
BOARDTYPE=Radeon 9250
(DDCMODE=ALL)
VSYNCMIN=60
VSYNCMAX=75
HSYNCMIN=31500
-------
Kick Layout should show:
MODULE Kickstart/PCIGraphics.card-->53.1(12/10/2009)
MODULE Kickstart/ATIRadeon.chip-->53.19(12/11/2009)

Go to top

  Register To Post

 




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2024 The XOOPS Project