First Warp3D Nova game released

@Caras

Finally got a log file with some hopefully not as useless as it looks info in it.

Ususaly I just get:

AmiCraft Nova.
Video init success
Start main loop.

This time after a lockup I got 274 "Attempt to free() is invalid." messages on one line.

Edit:

I doubled the stack size to 2000000 and got a dsi instead of a system lockup

Here's the crashlog:



save the image and Use dicpng to extract it.

I ugnored the DSI and could play for a few minutes then got a lockup, will try a bigger stack.

@salass00

Can I please ask what Radeon HD graphics card you have in your SAM460 to enable Warp3D Nova? So that I may try and buy one or better - anything that fits inside the SAM460.

@djrikki

AFAICT it's this one:
http://www.club-3d.com/index.php/prod ... n-r7-250-low-profile.html

Ranger identifies it as a Radeon HD 7750 with Cape Verde PRO chipset.

I ordered it from a link someone posted either here or on amigaworld.net.

@salass00

Any heat issues if you also have a sil PCI sata card installed ? Or do you use a pciex16 extender cable ?

@Spectre660

Not that I know of (no extender cable). I have a SiI3512 PCI card that I use for my CD/DVD drive.

It's a low profile card so it doesn't take up more than one slot. The Radeon HD 5450 I was using in the Sam460 before is now in my PC (the GeForce card that it was using before was too loud).

@salass00 + djrikki

I posted the link to the Club3D 250E some times. Before i found this one, i tested some other cards. The main reason for this is that it is small enough to let the pci slot in the sam460 available and it is low profile which i needed for my case.

Most of the cards which are available have a bigger fan/cooler system and covers the pci slot which is needed for a DMA-SATA card in sam460.

As i found out, it is just a renamed RadeonHD 7750 which works fine wit hour drivers (RadeonHD + W3D SI + W3D Nova). Nota that Club3D also has another 250 card but with DDR3 Ram and no LowProfile, this does not work!

Another solution für the Sam460 is a PCI-E Riser Card, then you can put the Card on any place of your case and also use a bigger one (currently i have this option)

@imagodespira + salass00 + djrikki

I use this model
http://www.newegg.com/Product/Product.aspx?Item=N82E16814129263

with a pciex16 riser cable as heat builds up if used directly in the pciex16 slot .

Hi Guys ò/

Can someone share AmiCraft non Nova requirements , please ?

Alphas en Betas versions. If u have punchtree too would be much appreciated :)

Regards

Anyone can tell if this game has a version which runs on a mA1 somehow? I mean earlier builds. I have an XEG3 and a mA1 albeit currently only the mA1 is complete with freshly installed system, but if I'm right, earlier versions were able to run on that too.

@Reynolds

i found it finally thanks to @Samo79 :)

You can dowload it here:

http://mabo.altervista.org/amiga/AmiCraft_Beta_3.lha

And yes it works :D