I receive my new Cyrus +. HAPPY Install in fresh HD. All O.K. HAPPY But in the install apears a "warning" " No more SmartFilesystem and others. Very UNHAPPY
I have a HD with 3 Smartfile partitions, all my work and programs is there.
And NOW, WHAT ?
It's a way to install SmartFilesystem ?
Recover data ?
One more thing.
How I can put the clock of board at correct date ?
To A-Eon How is that a Board of this class and price, don't come with a reference manual ?
:(
AmigaOne X5000 OS4.1 FEU1 And Lubuntu 10.04 1200 towered with Blizzard PPC - BVision and Mediator And a new fantastic Chameleon64
Your dealer should have provided you with a printed Technical Reference Manual - we speciifically asked them all to do so. Who did you buy this X5000 from?
Also the Enhancer SOftware has a fully licenced SmartFileSystem that works with the X5000. Did you dealer offer you the Enhancer Software at time of purchase? It also contains many other pieces of software which are essential for use with the X5000 such as RadeonHD driver, Warp3D Nova, AmiDVD, Partition Wizard and much more - all of which are not provided with OS4.1
Your dealer should have provided you with a printed Technical Reference Manual - we speciifically asked them all to do so. Who did you buy this X5000 from? Also the Enhancer SOftware has a fully licenced SmartFileSystem that works with the X5000. Did you dealer offer you the Enhancer Software at time of purchase? It also contains many other pieces of software which are essential for use with the X5000 such as RadeonHD driver, Warp3D Nova, AmiDVD, Partition Wizard and much more - all of which are not provided with OS4.1
That's one of a number of reasons why some of us are waiting for amigakit to start selling X5000. Can you tell us when X5000 will be available at amigakit.
Amiga X1000 with 2GB memory & OS 4.1FE + Radeon HD 5450
@RIBDEVIL Since Cyrus appears to only have 2 SATA ports, I assume you've already bought a SATA card for copying files from your other hard drive. I am considering an X5000 so can you let us know what SATA card, sound card and network card you purchased for your Cyrus board?
I have a SAM Flex & X1000 that I back up to an SFS formatted hard disk using DELOCK eSATAp adapters. I really want to have my backup drive accessible to all my systems and don't want to switch my backup drive to slow FFS. Dropping SFS support from Cyrus doesn't seem like a good idea to me and will factor into my decision to get an X5000.
Amiga X1000 with 2GB memory & OS 4.1FE + Radeon HD 5450
Dropping SFS support from Cyrus doesn't seem like a good idea to me and will factor into my decision to get an X5000.
Hyperion remove its support probably because AEON got rights for SFS now, as they can pay devs better (or more) than Hyperion. Hyperion just can't include it probably anymore, even read-only mode was kind of gift so users will not angree a lot.
Also they (Hyperion) provide a new alternative for sfs : ngfs. It is on the same level by speed as SFS and use all that new stuff which modern (in amiga terms) FS needs.
If that's the case then a lot of people will be shocked when they install OS4.2 and discover they can't access their SFS partitions without buying the Enhancer package. That will, in effect, more than double the cost of OS4.2.
Unless Hyperion only licensed SFS for a limited period of time, I fail to believe that they couldn't have included the old version it with OS4 for X5000.
Amiga X1000 with 2GB memory & OS 4.1FE + Radeon HD 5450
Well, After mount the SAM and copy the enhancer software to a usb, installed in X5000, all well, except that the new clock hangs the computer. So get out by the moment.
After a reset, chachan (trumpets and drumroll), all partitions are in the workbench,YEAHHH
So, conclusion after first X5000 day.
1.- SIL3114 works fine, I try speed test tomorrow. 2.- Don't use a KVM, makes slowwww the boot, and sometimes gives errors in mouse and keyboard. 3.- VERY IMPORTANT. If you hve Smartfile partitions, take the Enhancer Pack in the hand, it's vital to access the partitions.
Now, I try to undertand the U Boot, and how put the board on time and hour.
AmigaOne X5000 OS4.1 FEU1 And Lubuntu 10.04 1200 towered with Blizzard PPC - BVision and Mediator And a new fantastic Chameleon64
The version of SFS in OS4 does not run on the X5000. Please don't blame Hyperion for that, as they have no control over it, no source code and no updated version.
There is an updated version that will run on the X5000 but you can only buy it from AmigaKit.
@RibDevil:
I see you already have an SiI3114 SATA card. I hope it works OK for you, but the 2-port 3112 and 3512 work better for most people.
@All: Don't buy an SiI3114 for your X5000 or you will be disappointed. It reads OK but it Writes only at PIO speed (we haven't found the cause yet). The other cards work just fine.
The version of SFS in OS4 does not run on the X5000. Please don't blame Hyperion for that, as they have no control over it, no source code and no updated version.
There is an updated version that will run on the X5000 but you can only buy it from AmigaKit.
Guess there had to crawl in a "must buy" case for the Enhancer package...just came sooner than later
Now, I try to undertand the U Boot, and how put the board on time and hour.
Have you tried SYS:Prefs/Time and SYS:C/SetClock? Actually, if it's only the hour that's off then maybe you should check that you have your Locale time zone set correctly (GetEnv TZONE).
Amiga X1000 with 2GB memory & OS 4.1FE + Radeon HD 5450
News feed
OS4 Feedback forum
OS4Depot Feedback forum
Amigabounty forum
OpenAmiga forum
AmiCygnix forum
ABC shell forum
AmiKit forum
Cinnamon Writer forum
CodeBench forum
Digital Universe forum
Dopus 5 forum
E-UAE forum
Gnash forum
Ibrowse forum
JAmiga forum
Odyssey forum
OWB forum
Qt forum
SmartFileSystem forum
Timberwolf forum
TouchDevice forum
TuneNet forum
Unsatisfactory Software forum
Donate
