USB devices that work with OS4.1 FE

@Raziel

thanks, list updated

Joydivision Digital joystick adapter - working fine, just needs calibration in AmigaInput.

http://www.onyxsoft.se/joydivision.html

Wingman Formula steering wheel and pedals works fine connected to USB port of an X1000 and through AmigaInput.

@smf & TSK

thanks guys list updated

@328gts

hi, can I also post some hardware which is not working?

IMHO a list of "USB devices that do NOT work with OS4.1 FE" could be handy too.

And am I still in time to wish everyone here a Happy new year?!


Edit: I should have read the entire first post.. anyway

Partially working:

- Zalman ZM-M520W(L) in "Early boot Menu" the mouse pointer only moves _vertically_. After OS4.1FE is completely booted it works fine.
- Cherry XERO Corded MC-3000 in "Early boot Menu" the mouse pointer only moves _horizontally_. After OS4.1FE is completely booted it works fine.
- StarTech SV431DVIUDDM AmigaONE X1000 hangs at UBoot if the KVM is connected to the "Keyboard" USB-port. ONLY AFFECTS X1000!
- ATEN CS682 AmigaONE X1000 sporadically hangs at UBoot if the KVM is connected to the "Keyboard" USB-port. ONLY AFFECTS X1000!
- Belkin SOHO KVM switch AmigaONE X1000 hangs at UBoot if the KVM is connected to the "Keyboard" USB-port. ONLY AFFECTS X1000!

Working
- ATEN CS22U KVM switch. No issues found
- Wintech SAC-50/DMI-55 USB SATA IDE converter
- SpeedLink Competition Pro Joystick USB
- Epson Stylus Color 760 Needs TurboPrint 7.60 (available for purchase January 2018 at www.zedonet.com. online shop for irseesoft.de). Parallel Port AmigaONE-XE with TurboPrint 7.10)
- Digisol 4.1 USB card reader

Edit 2: Tested with AmigaONE-XE, Sam440, AmigaONE-X1000 and AmigaONE-X5000

@Amigo1

Quote:

I have a Zalman ZM-M201R with my X5000, and I sometimes experience the same issue, but after booting into OS4.1FE.

@daveyw

Maybe these manufacturers do not comply to the HID standards?
I found a couple of other mice which do the same (sadly I had not kept a note of model numbers), but I experienced it only
in Early Boot. However it seems something differs between the early boot usb driver and the full os4.

@TSK

Calibrating Logitech Wingman Formula in AmigaInput prefs, when it asks to move a joystick to upper left corner turn the wheel the farthest left position, hold the gas pedal down and press any of the buttons on the wheel. When it asks to move the joystick to bottom right corner turn the wheel to the farthest right position and hold the brake pedal down and press a button. Even if the small dot inside a square doesn't move correctly the controller works correctly afterwards.

I have bought the Gigabyte K83 Mechanical keyboard, and it is having problems with the X5000.

When connected to the X5000 i get an error when the machine boots into OS4.1 FE. Sometimes the keyboard is just not responsive or detected at all.

The weirdest thing is when connected to the X5000... the Uboot screen with boingball is in Accelerated mode... the boingball spins factor 5..

For now i would not recommend buying this keyboard...

@Skateman

thanks, main page updated !

Hello all,
I bought that:

https://it.aliexpress.com/item/Nygacn- ... Computer/32668351496.html

on ebay and unfortunately seems to not works on my Pegasos2 AmigaOs4.1FEUpd1 setup...instead it works perfectly under MOS...any hope to have it working on AmigaOS4.1 someway?

does anybody know if those lovely 8bitdo pads will work via USB on OS4.1FE??

http://www.8bitdo.com/sn30pro-sf30pro/

@LyleHaze

Quote:
Just for the fun of it, I've tried to plug in my little son's rollable toy piano (bought in a local Tchibo store). It's got USB MIDI connection, and it works just fine with your CAMD driver

I'm happy to report that the wonderful Arturia KeyStep MIDI control keyboard / step-sequencer / arpeggiator works very well with the CAMD USB MIDI driver.

@trixie

I confirm I tested with Horny and that I use the CAMD driver that of aminet usbmidi.lha 50.1 is more stable than version 50.5

Alesis Vortex Wireless 2 portable keyboard works well with it's wireless USB dongle and through MIDI.

I forgot to mention in this specific thread, M.Audio Keystation 61 III (a MIDI keyboard) works very well...and now, Roland digital piano FP-30X works too.

All the touchscreens supported by the touch.device.
I'm the author of touch.device.
You can find the list of supported touchscreens in the project site:
https://project4a.webs.com/touch-device

@AlfredOne, mr2, sinisrus, trixi, Amiga1, TSK

thanks! List updated.

@ ALL

Please let me know if anything you previously entered on the list is broken/not working OR is now working etc.