Login
Username:

Password:

Remember me



Lost Password?

Register now!

Sections

Who's Online
119 user(s) are online (106 user(s) are browsing Forums)

Members: 1
Guests: 118

billyfish, more...

Support us!
Donate

Headlines
Recent files - OS4Depot - Your one stop for AmigaOS4 files

 
Jump to the bottom of the page Bottom    View previous topic Previous Topic    View next topic Next Topic

  Register To Post  

derfs
X5000 UBOOT freeze - Fixed
Posted on: 2020/1/19 20:11    #1
Not too shy to talk
Not too shy to talk


See User information
My X5000 has decided to stop booting, and UBOOT output is as follows.

U-Boot 2014.04 (Oct 17 2016 - 08:22:22)

CPU0:  P5020, Version: 2.0, (0x82200020)
Core:  e5500, Version: 1.2, (0x80240012)
Clock Configuration:
       CPU0:1995 MHz, CPU1:1995 MHz,
       CCB:798  MHz,
       DDR:665  MHz (1330 MT/s data rate) (Asynchronous), LBC:49.875 MHz
       FMAN1: 498.750 MHz
       QMAN:  399 MHz
       PME:   399 MHz
L1:    D-cache 32 KiB enabled
       I-cache 32 KiB enabled
Reset Configuration Word (RCW):
       00000000: 0c540000 00000000 1e1e0000 00000000
       00000010: 44808c00 ff002000 68000000 45000000
       00000020: 00000000 00000000 00000000 0003000f
       00000030: a0000000 00000000 00000000 00000000
Board: CYRUS
36-bit Addressing
I2C:   ready
SPI:   ready
DRAM:  Initializing....using SPD
Detected UDIMM M378B5173EB0-YK0
Not enough bank(chip-select) for CS0+CS1 on controller 0, interleaving disabled!
There is no rank on CS0 for controller 1.
Not enough bank(chip-select) for CS0+CS1 on controller 1, interleaving disabled!
Not all controllers have compatible interleaving mode. All disabled.
2 GiB left unmapped
4 GiB (DDR3, 64-bit, CL=9, ECC off)


I have swapped ram, unplugged everything and still dont know why its stopping at this point. Has anyone else seen this before?

Only things connected are memory, serial<>usb and case/power cables.


Edited by derfs on 2020/1/23 21:52:50
Go to top
Antique
Re: X5000 UBOOT freeze
Posted on: 2020/1/19 21:03    #2
Home away from home
Home away from home


See User information
@derfs

Not sure about this one. But do you have 1 or 2 memory dimms? If you have 2, try with one of them instead.... Just maybe....

Just thinking of these lines...
Quote:

2 GiB left unmapped
4 GiB (DDR3, 64-bit, CL=9, ECC off)
X5000
Go to top
derfs
Re: X5000 UBOOT freeze
Posted on: 2020/1/19 21:13    #3
Not too shy to talk
Not too shy to talk


See User information
@Antique

I have another 4gb dimm, and the X5000 was working fine with both, but it doesnt matter which one i put in, or both in a different order, i still get the same issue.

I have kept it as a single dimm just to try and minimise what is connected.
Go to top
walkero
Re: X5000 UBOOT freeze
Posted on: 2020/1/19 22:20    #4
Site Builder
Site Builder


See User information
Does it boot to Installation CD?
Follow me on
Ko-fi, Twitter, YouTube, Twitch
Go to top
SinanSam460
Re: X5000 UBOOT freeze
Posted on: 2020/1/20 3:21    #5
Not too shy to talk
Not too shy to talk


See User information
@derfs

Did you. try rewriting Uboot image on a new micro sd card ?
Sinan - AmigaOS4 Beta-Tester
- AmigaOne X5000
- AmigaOne A1222
- Sam460ex
Go to top
derfs
Re: X5000 UBOOT freeze
Posted on: 2020/1/20 11:55    #6
Not too shy to talk
Not too shy to talk


See User information
@walkero

it doesnt get that far - freezes mid-UBOOT initialization.
Go to top
derfs
Re: X5000 UBOOT freeze
Posted on: 2020/1/20 11:56    #7
Not too shy to talk
Not too shy to talk


See User information
@SinanSam460

No, as i dont have the X5000 UBOOT image, and i believe am still on an older version of UBOOT.
Go to top
trixie
Re: X5000 UBOOT freeze
Posted on: 2020/1/20 12:41    #8
Amigans Defender
Amigans Defender


See User information
@derfs

I'd call AmigaKit and ask if they could send you an SD card with the latest image.
The Rear Window blog

AmigaOne X5000 @ 2GHz / 4GB RAM / Radeon RX 560 / ESI Juli@ / AmigaOS 4.1 Final Edition
SAM440ep-flex @ 667MHz / 1GB RAM / Radeon 9250 / AmigaOS 4.1 Final Edition
Go to top
derfs
Re: X5000 UBOOT freeze
Posted on: 2020/1/22 21:36    #9
Not too shy to talk
Not too shy to talk


See User information
@trixie

I have sent them an email but I have had no response yet. I will see how it goes.
Go to top
LiveForIt
Re: X5000 UBOOT freeze
Posted on: 2020/1/23 6:31    #10
Home away from home
Home away from home


See User information
@derfs

I think UBOOT is saying it does not support your DRAM...

Quote:

DRAM: Initializing....using SPD
Detected UDIMM M378B5173EB0-YK0
Not enough bank(chip-select) for CS0+CS1 on controller 0, interleaving disabled!
There is no rank on CS0 for controller 1.
Not enough bank(chip-select) for CS0+CS1 on controller 1, interleaving disabled!
Not all controllers have compatible interleaving mode. All disabled.


Detected UDIMM M378B5173EB0-YK0


https://starmicroinc.net/samsung-4gb-d ... -memory-m378b5173eb0-yk0/

I can see your RAM sucks, get som ram that is defigned for your computer, who build this computer was this the RAM from Amiga KIT.

wtf... "non-ECC" way... you have cheap ram in your computer. trow the DRAM in the trash!!! and get "ECC" DRAM, check techinal manual for correct memory before buying.

And buy a good expensive PSU while your at it, its so typical that they try to sell you some crap… and hope it works out for you should get your money back this type customer service suck..

DO NOT TRY TO FLASH UBOOT BEFORE YOU HAVE GOOD DRAM..



Edited by LiveForIt on 2020/1/23 6:47:08
Edited by LiveForIt on 2020/1/23 6:50:03
Edited by LiveForIt on 2020/1/23 6:50:56
(NutsAboutAmiga)

Basilisk II for AmigaOS4
AmigaInputAnywhere
Excalibur
and other tools and apps.
Go to top
derfs
Re: X5000 UBOOT freeze
Posted on: 2020/1/23 10:08    #11
Not too shy to talk
Not too shy to talk


See User information
@LiveForIt

from the manual

Quote:
Cyrus Plus uses standard 1.5V DDR3 DIMMs, 1 socket for P3041 and 2 sockets for P5020/P5040.

The board has been qualified with unbuffered non-ECC DIMMs. For the latest information on recommended DIMM module types, please contact your reseller.

It is recommended to use DIMMs in matched pairs.
Go to top
tonyw
Re: X5000 UBOOT freeze
Posted on: 2020/1/23 11:37    #12
Quite a regular
Quite a regular


See User information
Ignore NutsAboutAmiga, there is nothing wrong with your RAM.

The output from your RAM init sequence is quite normal, there is something else wrong, much later.

Have you tried:
1. Remove the graphics card and all plugin cards.
2. Replace the CR2032 coin cell.

In my X5000s, I sometimes have to pull out the RAM DIMMs and clean the sockets with a small stiff brush (like every 6 months). I also clean the edge connectors of the DIMMs with a fine eraser, not handling the connector afterward.
cheers
tony
Go to top
derfs
Re: X5000 UBOOT freeze - Fixed
Posted on: 2020/1/23 22:03    #13
Not too shy to talk
Not too shy to talk


See User information
@tonyw

I had already taken everything out and back in again a couple times, but not the CR2032 so I swapped that over as well.

It still didnt work after all that but as i was swapping the CR2032 back over i noticed that the ATX plug was ever so slighlty out on one side. One careful push later and the machine boots again.

At least i now know the cause and if this same issue happens to someone else at least there is now this thread.
Go to top
tonyw
Re: X5000 UBOOT freeze - Fixed
Posted on: 2020/1/23 22:43    #14
Quite a regular
Quite a regular


See User information
@derfs

Good work.
cheers
tony
Go to top

  Register To Post

 
Jump to the top of the page Top    View previous topic Previous Topic    View next topic Next Topic




Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )




Powered by XOOPS 2.0 © 2001-2024 The XOOPS Project