OS4 UPDAAAATEE !!! BANANA !!

@broadblues
Quote:
MultiViewer.

Quote:
Would be happy to if you can supply a link. I looked and can't seem to find it. Can just any user submit bugs there?

@ktadd
http://www.amiga.org/developer/bugreports/my_view_page.php

@Spectre660

Quote:

Which HW? How do you copy text (Amiga-C or something else?)? Did you run CPU_Watcher in its "busy" or "simple" mode?

walkeroo wrote:

"you are right about these libs. It was my mistake I didn't include them, because I had the impression that those files exist in libs already.

I will see if we can add them in the Update 2 archive and fix this. But you can also copy them from the MUI 2020R3 archive as well."


Thanks & please let us know when the updated Update 2 archive will be availabel.

@Capehill

Sam460ex.
AmigaShell: Edit Menu - Copy.
Busy Mode .
Also occurs with simple mode .

@Spectre
Can you try this please: revert textclip-handler to 53.1 and test again? (or what version were in update1 or in FE), just to be sure that it not related (can be). That with Cpu_watcher running of course.

ps. on x5000 can't reproduce with cpu_watcher :(

@Capehill & kas1e

Looks like something else maybe causing the issue which is triggered by CPU_Watcher.Can't reproduce with clean Update 2.
Will see if I can locate the culprit .

@Capehill & kas1e

A-EOn Enhancer X-Dock 2.42 seems to be the culprit .

@walkero

Quote:

Will be nice and needed.
And just as we are here and considering the various issues reported by some, do you think it could be possible to include also the updated version of Roadshow?

@samo
Quote:
Dunno if you read all the sites, but was stated few times that it may follow later, if, and when it all will be beta-tested and issues fixed. It's not ready for release as it.

@spectre
Quote:

But then NinjaCyborg didn't have them (?)

@kas1e

I don't use x-dock, no.

Nice, I suppose that they need to release an updated NDK.

@kas1e

As the lockup does not occur for me with a clean install it may be time to start looking at system hardware maybe .

My Config

Graphics card - Radeon Rx550 Polaris video card.
SATA Card - PCI Sil3112 or Sil3512(switched to the SIL3112 today)
Ethernet - Onboard Ethernet


I note that NinjaCyborg is using a wireless atheros5000 based PCI 3Com wifi card for Ethernet and a RadeonHD 6540 graphics card .

Should probably try to eliminate the WIFI card a a possible cause .

@samo79
Sorry, I don't have anything to add about roadshow.

@Spectre660

­Let's compare your shownetstatus info:

Ethernet stalls after some browsing in Odyssey:
64 bytes from 37.156.192.50: icmp_seq=116 ttl=57 time=16.676 ms
64 bytes from 37.156.192.50: icmp_seq=117 ttl=57 time=25.383 ms
64 bytes from 37.156.192.50: icmp_seq=118 ttl=57 time=34.083 ms
64 bytes from 37.156.192.50: icmp_seq=119 ttl=57 time=42.16 ms
64 bytes from 37.156.192.50: icmp_seq=120 ttl=57 time=26.534 ms
ping: sendto: No buffer space available
ping: wrote sunet.se 64 chars, ret=-1
ping: sendto: No buffer space available
ping: wrote sunet.se 64 chars, ret=-1
ping: sendto: No buffer space available


6.Workbench:> shownetstatus ppc460ex_eth
Gränssnitt "ppc460ex_eth"
Drivrutin = ppc460ex_eth.device
Enhetsnummer = 0
Hårdvaruadress = 00:50:C2:XX:XX:XX
Maximal överförbar enhet (MTU) = 1518 Byte
Överföringshastighet = 1000000000 bitar/sekund
Hårdvarutyp = Ethernet
Skickade paket = 2034
Mottagna paket = 4453
Slängda paket = 0 (in = 0, ut = 90)
Överskridande av buffert = 0
Okända paket = 1
Adress = 192.168.137.39
Nätmask = 255.255.255.0
Antal I/O-läsförfrågningar = 36 (toppnotering på 36 vid en viss tidpunkt, 36 pågående)
Antal I/O-skrivförfrågningar = 32 (toppnotering på 32 vid en viss tidpunkt, 32 pågående)
Antal mottagna byte = 5 110 760
Antal skickade byte = 305 310
Överföringsstatistik (in/ut) = DMA:0/0 Byte:4452/6246 Word:-/0
Adressbindning = Dynamisk
Lån av adress upphör = 2021-01-02 22.17.56
Länkstatus = Uppe

@arfcarl


ping: wrote 192.168.1.1 64 chars, ret=-1
ping: sendto: No buffer space available
ping: wrote 192.168.1.1 64 chars, ret=-1
ping: sendto: No buffer space available
ping: wrote 192.168.1.1 64 chars, ret=-1


18.AmigaOS_4.1:> shownetstatus ppc460ex_eth
Interface "ppc460ex_eth"
Device name = ppc460ex_eth.device
Device unit number = 0
Hardware address = 00:50:C2:XX:XX:XX
Maximum transmission unit = 1518 Bytes
Transmission speed = 1000000000 Bits/Second
Hardware type = Ethernet
Packets sent = 1090
Packets received = 1916
Packets dropped = 0 (in = 0, out = 32)
Buffer overruns = 0
Unknown packets = 424
Address = 192.168.1.25
Network mask = 255.255.255.0
Number of read I/O requests = 36 (maximum of 12 used at a time, 36 are still pending)
Number of write I/O requests = 32 (maximum of 32 used at a time, 32 are still pending)
Number of bytes received = 1,227,243
Number of bytes sent = 110,130
Transfer statistics (in/out) = DMA:0/0 Byte:1492/1781 Word:-/0
Address binding = Static
Link status = Up

@Spectre660

Thanks. Nothing of particular interest there. DHCP or static IP shouldn't matter.

What CAS Latency do you have? I have CL 4 according to the serial output from my Sam460ex: 2 GiB (ECC not enabled, 575 MHz, CL4).

Do you have any DDR Boost enabled in U-Boot? I have it disabled.

@arfcarl

U-Boot 2015.a (May 16 2015 - 14:20:11)

CPU: AMCC PowerPC 460EX Rev. B at 1155 MHz (PLB=231 OPB=115 EBC=115)
No Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
Internal PCI arbiter enabled
32 kB I-Cache 32 kB D-Cache
Board: Sam460ex/cr, PCIe 4x + PCIe 1x
I2C: ready
DRAM: 2 GiB (ECC not enabled, 462 MHz, CL4)


DDR Boost disabled.

Really appreciate all the recent work, however the current ESP beta and Update 2 shenanigans have actually made me not use my X1000 this holiday... I need to sit back and take time to formulate a clear update plan.

@Spectre660

So you have the 1155 MHz version while I have the 1150 MHz version.

@ddni

You can use it without upgrading it.


@all

I've downloaded the new Snoopy from OS4depot.net, let's see if it can show anything. Debug kernel with level 15 haven't shown anything via the serial port when the problem appears.