Shutdown>Restart OS issue (X5000) (SOLVED)

	Bottom Previous Topic Next Topic
Register To Post

rjd324

Posted on: 2022/4/18 20:50 #1

Quite a regular

On my X5000 I can no longer use the Shutdown>Retart Amiga OS feature.

My X5000 came installed with AOS4FEU2; the issue was present even then. I wanted a clean install from scratch for myself anyway. As I built up the install I tested this feature at various times and it worked. Even after installing the enhancer 2.1 files / radeonRX and installing the RX card it all worked.

All I know is that in the last few hours I have made some GUI/Workbench prefs tweaks and that I have installed the Z-TOOLS. Now, when I try to "restart AmigaOS" I just get a black screen saying that there is no input.

There seems to be some issue here that does not happen on my X1000 and I am not sure what it is.

What is the equivalent command to "Shutdown>Restart AmigaOS" that I can run from shell and/or can I get any serial output when I try this.

Trying to figure this one out.

Edited by rjd324 on 2022/4/18 21:52:05
Edited by rjd324 on 2022/6/27 17:39:10
Edited by rjd324 on 2022/6/28 17:21:27

If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.

rjd324

Re: Shutdown>Restart OS issue (X5000)

Posted on: 2022/4/18 21:13 #2

Quite a regular

Okay,


reboot fast

is the equivalent command.

I really do not want to spend another half a day installing things one by one to figure out where the conflict is. Let's just see if I get anyone else having encountered the same issue before I force myself to do that. Not having this ability will get annoying, quick.

If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.

sacc-dude

Re: Shutdown>Restart OS issue (X5000)

Posted on: 2022/4/18 21:14 #3

Just popping in

@rjd324

It's an issue with the RX cards..
They don't respond to a soft reset!

kas1e

Re: Shutdown>Restart OS issue (X5000)

Posted on: 2022/4/18 21:33 #4

Home away from home

@rjd324
Quote:

On my X5000 I can no longer use the Shutdown>Retart Amiga OS feature.

Hans explain everywhere many times (but that maybe be missed of course) that newer gfx cards is not designed to have soft resets at all, and he tried all possible stuff he can think of without success. If i remember right even with RadeonHD it was kind of "luck" but not more than that.

In other words new cards mean no soft reboot for us anymore. Theoreticaly some devs says it possible, but the only one who working on drivers are Hans, and he tols that from his pov and skills is unpossible.

Join us to improve dopus5!
AmigaOS4 on youtube

trixie

Re: Shutdown>Restart OS issue (X5000)

Posted on: 2022/4/18 21:47 #5

Amigans Defender

@rjd324

Use Shutdown->Restart computer instead.

The Rear Window blog

AmigaOne X5000 @ 2GHz / 4GB RAM / Radeon RX 560 / ESI Juli@ / AmigaOS 4.1 Final Edition
SAM440ep-flex @ 667MHz / 1GB RAM / Radeon 9250 / AmigaOS 4.1 Final Edition

rjd324

Re: Shutdown>Restart OS issue (X5000)

Posted on: 2022/4/18 21:51 #6

Quite a regular

That's all I needed guys. Thanks for the input. I'll mark it as solved.

If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.

rjd324

Re: Shutdown>Restart OS issue (X5000)

Posted on: 2022/6/27 17:46 #7

Quite a regular

I get different behaviour between:

1 - Choosing Shutdown->Restart Computer
vs
2 - Cntrl+LAmiga+RAmiga.

1 works okay,
but 2 will just restart with a black screen and no output. Here is the relevant part of the serial log with debuglevel 20 (no debug kernel):


LAW0: F_E0000000 Size 10000 Tgt eLBC (0x81F0000F)

LAW1: F_E1000000 Size 1000 Tgt eLBC (0x81F0000B)

LAW2: F_F4000000 Size 200000 Tgt Buffer manager (0x81800014)

LAW3: F_F4200000 Size 200000 Tgt Queue manager (0x83C00014)

LAW4: F_00000000 Size 2000000 Tgt DCSR (0x81D00018)

LAW5: C_00000000 Size 20000000 Tgt PCI Express 1 (0x8000001C)

LAW6: F_F8000000 Size 10000 Tgt PCI Express 1 (0x8000000F)

LAW7: C_20000000 Size 20000000 Tgt PCI Express 2 (0x8010001C)

LAW8: F_F8010000 Size 10000 Tgt PCI Express 2 (0x8010000F)

LAW31: 0_00000000 Size 0 Tgt Memory complex 1 (0x8100001F)

msr: 0x00003030

TLB1 (64 entries):

 * [ 52]: size=7 tid = 0 TS = 1 epn=0xFE000000 rpn=0x0000000F_FE000000 WIMG=0x5 

XXWWRR=0xF protected

 * [ 53]: size=6 tid = 0 TS = 1 epn=0x01000000 rpn=0x00000000_01000000 WIMG=0x0 

XXWWRR=0x5 protected

 * [ 54]: size=6 tid = 0 TS = 1 epn=0x01400000 rpn=0x00000000_01400000 WIMG=0x0 

XXWWRR=0x5 protected

 * [ 55]: size=6 tid = 0 TS = 1 epn=0x01800000 rpn=0x00000000_01800000 WIMG=0x0 

XXWWRR=0x33 protected

 * [ 56]: size=6 tid = 0 TS = 1 epn=0x01C00000 rpn=0x00000000_01C00000 WIMG=0x0 

XXWWRR=0x33 protected

 * [ 57]: size=6 tid = 0 TS = 1 epn=0x02000000 rpn=0x00000000_02000000 WIMG=0x0 

XXWWRR=0xF protected

 * [ 58]: size=4 tid = 0 TS = 1 epn=0x02400000 rpn=0x00000000_02400000 WIMG=0x0 

XXWWRR=0xF protected

 * [ 59]: size=3 tid = 0 TS = 1 epn=0x02440000 rpn=0x00000000_02440000 WIMG=0x0 

XXWWRR=0xF protected

 * [ 60]: size=3 tid = 0 TS = 1 epn=0x02450000 rpn=0x00000000_02450000 WIMG=0x0 

XXWWRR=0xF protected

 * [ 61]: size=7 tid = 0 TS = 0 epn=0xFE000000 rpn=0x0000000F_FE000000 WIMG=0x5 

XXWWRR=0xF protected

 * [ 62]: size=A tid = 0 TS = 0 epn=0x00000000 rpn=0x00000000_00000000 WIMG=0x0 

XXWWRR=0x3F protected

 * [ 63]: size=A tid = 0 TS = 0 epn=0x40000000 rpn=0x00000000_40000000 WIMG=0x0 

XXWWRR=0x3F protected

HAL_MaxTLB = 51, HAL_NextTLB = 0

MMUCFG = 0x064809C4

mas0 = 0x103F0000

mas1 = 0xC0000A00

mas2 = 0x40000000

mas3 = 0x4000003F

mas4 = 0x00000100

mas5 = 0x00000000

mas6 = 0x00000001

mas7 = 0x00000000

mas8 = 0x00000000

RadeonRX (2): Identified the chipset as: POLARIS11

RadeonRX (2): Graphics card name is: Radeon RX Polaris11

RadeonRX (2):        If - and only if - your card does not work or does not work

 optimally

       please submit a bug report at:

       http://www.amiga.org/developer/bugreports 

       Remember to include the driver version, and the following card details:

       0x67FF:0x1DA2:0xE348: <name of board>

       and *please* describe the problems you are seeing in detail.

[EHCI] *usbbase=FE210100

[EHCI] *usbbase=FE211100

graphics.library P50XX optimizations enabled

RadeonRX (0): RadeonRX.chip 2.8 (19.8.2021)

RadeonRX (2): Identified the chipset as: POLARIS11

RadeonRX (2): Graphics card name is: Radeon RX Polaris11

RadeonRX (2):        If - and only if - your card does not work or does not work

 optimally

       please submit a bug report at:

       http://www.amiga.org/developer/bugreports 

       Remember to include the driver version, and the following card details:

       0x67FF:0x1DA2:0xE348: <name of board>

       and *please* describe the problems you are seeing in detail.

RadeonRX (0): KCQ enable failed (scratch(0xC040)=0xCAFEDEAD)

RadeonRX (0): hw_init of IP block <gfx_v8_0> failed -22

graphics.library cannot configure your graphics board!

Either your board is not supported or there's a configuration problem.

Did you install PCIGraphics.kmod?

Quote:

Did you install PCIGraphics.kmod?

I have no such thing in my SYS:kickstart/

My kicklayout:


; $VER: Kicklayout-AmigaOneX5000 53.10 (24.10.2016)

;

; Kernel configuration for the AmigaOne X5000 from A-EON Technology Ltd

;

; This file describes how the "Kickstart" image should look like,

; i.e. it describes which modules should be pre-loaded and available

; at boot time.

;

;

; Format:

; ~~~~~~

; The file lists one or more configurations.

;

; Each configuration starts with the LABEL keyword, followed by the

; name of the configuration.  The name can be used to specify the

; configuration in the bootloader tool (see Documentation/kernel/

; bootloader.txt). Note that empty lines end one configuration and

; start the next, which means that you must be careful not to leave

; an empty line anywhere unless you are defining multiple configurations.

;

; Each configuration must have exactly one line with the EXEC keyword.

; This specifies the filename of the main kernel to use. This kernel is

; the absolute minimum required to boot. It contains, among other things,

; exec.library.

;

; The following lines define additional modules to be loaded into the

; kickstart image. Each of these lines starts with the MODULE keyword

; followed by the filename of the module.

;

;

;

; Configuration name

LABEL AmigaOS 4.1 Final Edition

EXEC Kickstart/loader

;MODULE Kickstart/kernel.debug

MODULE Kickstart/kernel

;

MODULE Kickstart/FastFileSystem

MODULE Kickstart/CDFileSystem

MODULE Kickstart/NGFileSystem

;

MODULE Kickstart/battclock.resource.kmod

MODULE Kickstart/bootmenu.kmod

MODULE Kickstart/bootimage

MODULE Kickstart/bootsd.resource.kmod

MODULE Kickstart/con-handler.kmod

MODULE Kickstart/console.device.kmod

MODULE Kickstart/dos.library.kmod

MODULE Kickstart/diskboot.kmod

MODULE Kickstart/diskboot.config

MODULE Kickstart/elf.library.kmod

MODULE Kickstart/env-handler.kmod

MODULE Kickstart/FileSystem.resource.kmod

MODULE Kickstart/gadtools.library.kmod

MODULE Kickstart/hunk.library.kmod

MODULE Kickstart/input.device.kmod

MODULE Kickstart/intuition.library.kmod

MODULE Kickstart/keyboard.device.kmod

MODULE Kickstart/keymap.library.kmod

MODULE Kickstart/mounter.library

MODULE Kickstart/newlib.library.kmod

MODULE Kickstart/nonvolatile.library.kmod

MODULE Kickstart/petunia.library.kmod

MODULE Kickstart/ram-handler.kmod

MODULE Kickstart/ramdrive.device.kmod

MODULE Kickstart/ramlib.kmod

MODULE Kickstart/shell.kmod

MODULE Kickstart/strap.kmod

MODULE Kickstart/timer.device.kmod

;

MODULE Kickstart/graphics.library.kmod

MODULE Kickstart/PCIGraphics.card

MODULE Kickstart/RadeonHD.chip

MODULE Kickstart/RadeonRX.chip

MODULE Kickstart/ATIRadeon.chip

MODULE Kickstart/3DLabsPermedia2.chip

MODULE Kickstart/3dfxVoodoo.chip

;

MODULE Kickstart/p50x0sata.device.kmod

MODULE Kickstart/sii3112ide.device.kmod

MODULE Kickstart/sii3114ide.device.kmod

MODULE Kickstart/sii3512ide.device.kmod

MODULE Kickstart/sii0680ide.device.kmod

MODULE Kickstart/lsi53c8xx.device.kmod

MODULE Kickstart/it8212ide.device.kmod

;

MODULE Kickstart/usbresource.library

MODULE Kickstart/usbsys.device

MODULE Kickstart/bootmouse.usbfd

MODULE Kickstart/bootkeyboard.usbfd

MODULE Kickstart/hub.usbfd

MODULE Kickstart/massstorage.usbfd

MODULE Kickstart/uhci.usbhcd

MODULE Kickstart/ohci.usbhcd

MODULE Kickstart/ehci.usbhcd

MODULE Kickstart/xena.resource.kmod

My SYS:Storage/Monitors:


-rwx------  1 root wheel 6560 2014-10-08 18:06 Radeon HD 5450

-rw-------  1 root wheel 9828 2022-04-17 20:04 Radeon HD 5450.info

-rwx------  1 root wheel 6560 2014-10-08 18:38 RTG

-rw-------  1 root wheel 9559 2014-10-08 18:38 RTG.info

-rwx------  1 root wheel 6560 2014-10-08 18:06 VooDoo

-rw-------  1 root wheel 9819 2022-04-17 20:04 VooDoo.info

The "Radeon HD 5450" Icon Information:


CMPLENGTH=14

BOARDTYPE=Radeon HD 5450

(DDCMODE=ALL)

VSYNCMIN=60

VSYNCMAX=70

HSYNCMIN=31000

HSYNCMAX=70000

MODE=640x480@60

MODE=800x600@60

MODE=1024x768@60

MODE=1280x720@60

MODE=1280x800@60

MODE=1280x960@60

MODE=1280x1024@60

MODE=1440x900@60

MODE=1600x900@60

MODE=1600x1200@60

MODE=1680x1050@60

MODE=1920x1080@60

MODE=1920x1200@60

(FAKENATIVEMODES=Yes)

INTERRUPT=Yes

I never changed the name of this icon. Actually, I am running a 560 RX Polaris 11.

I also have "AmigaKeyRemapper" running to swap functionality of L and R Amiga keys.

If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.

nbache

Re: Shutdown>Restart OS issue (X5000)

Posted on: 2022/6/27 22:51 #8

Just can't stay away

Quote:

Quote:

Did you install PCIGraphics.kmod?

I have no such thing in my SYS:kickstart/

For PCIGraphics.kmod, read PCIGraphics.card.

Best regards,

Niels

rjd324

Re: Shutdown>Restart OS issue (X5000)

Posted on: 2022/6/27 22:57 #9

Quite a regular

@nbache

Thanks. Well, that is in the kicklayout file.

If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.

rjd324

Re: Shutdown>Restart OS issue (X5000)

Posted on: 2022/6/28 13:53 #10

Quite a regular

https://www.amigans.net/modules/newbb/ ... t_id=65468#forumpost65468

It probably makes sense. I forgot about the difference between the Amiga and Alt keys.

If liberty means anything at all, it means the right to tell people what they do not want to hear.
George Orwell.

Register To Post
	Top Previous Topic Next Topic

Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )