Clock problem on my AmigaOne X5000

@Raziel

This tool is awesome, KDE Connect, just for Amiga! They should call it Ami Connect or something, I would never even guess judging by the title. Will test it asap -- No more FTP-ing!

@tonyw

So this pretty much sounds like what I have experienced. Looking forward to fix.

Thanks
Doug

@levellord

I didn't know of the existence until Raziel told me on this forums.

But how can I use it and what is the goal of this utilitie?

It could be cool to send you some pictures of my Amiga 5000's tower

@MamePPCA1

The purpose of it is to connect your phone (Android) with AmigaOS and then share files between. Let's say you took a picture and want to send this picture to your Amiga and edit it in SketchBlock. You open program on Amiga side and then open on Android side and from your phone select this image and send it to Amiga. After editing is done, you send edited picture back to your phone via this program. Before all this (I just tested the program and it works great), you need to copy *.apk file to your Android (32-bit or 64-bit), enable installation from unknown source and install the app. On Amiga side, you need to place drawer and files to location of your choosing and start it from there. Both will ask for IP of each other and since it is showing on the 1st prompt, just insert last IP address numbers. After that, set up the location of receiving files and you are good to go. You have to play around with it to figure out how it works, but it is pretty simple.

You other question about jabirulo's game:

Quote:

I hope this helps!

@levellord

Good to know it is simple to use and I will try later.

May my mobile phone have internet connection or not? For SimpleTransfer.

Thanks for the explanation levellord and also I will try jabirulo's new shooter

@MamePPCA1

Your phone and your Amiga must be in the same "Workgroup" via your router so they should "see" each other. First 3 sets of the IP should be the same on both devices, only last, 4th set of IP should be different.

Like this (IP below is example, it might not look the same with your set up):

192.168.1.XXX

On both devices 192.168.1. should be the same (Android/Amiga will report IP number) while last set will be different.

@MamePPCA1

It works both ways...think of it as a IP address link.
Once your X5000 and your mobile have linked, you can upload/download whatever you want between the two devices, your WLAN speed is the limit

edit: and you don't need to fiddle around with workgroups or other samba stuff...you just have to know your IP addresses (X5000 and mobile) and you are good to go.

@MamePPCA1

How to easily set up SimpleTransfer on your Amiga

1) Start it
2) Click on second from left icon in the upper row (settings)
You should see your X5000s IP address on top (This device: xxx.xxx.xxx.xx)
remember it for the mobile app
3) Remote IP - set the IP from your mobile here
To get your mobile IP, install the app on your phone and repeat steps 1 and 2
4) Receive Path - set your downloads path here

In the main window on the bottom should you read:
Waiting for: xxx.xxx.xxx.xx

that is your destination.
It will only change to found after you did the same with your mobile app.

Once they connected, you can shove whatver stuff around you want

@levellord

And about jabirulo's shooter I have to say that I have an extracting error while unpacking the Data's with UnArc.

Try extracting the archive via DOpus or CLI, I am not sure why Unarc is not working for you?

@levellord

Maybe the file is corrupt,I don't know.

I am trying to upload my pictures.How van I do it? imgbb.com doesn't work well on Odyssey...

@MamePPCA1

Try this, it is working for me:

Postimages

@levellord

OK it works!!!

Here it goes:

https://postimg.cc/gallery/SmM1xq9/22c16847

@MamePPCA1

Those pictures hurt my eyes...i can't make out any details and it seems they are either completely shaken or "washed".

What device did you use to take them?

@Raziel

A mobile phone branded Samsung A12.

Matbe I did these photos very quick?

If you desire maybe I can do more.

@Raziel

Forgot to say that I diid between my portable Pc-Amiga-Philips USB stick cause my miobile has a very flacky internet connection (practicakky unusable)

@levellord

Ah! And my system clock doesn't set right on my AmigaOS 4.1 now

Well, we can see that you're using the stock Fractal case.

Can you identify where the power cable from the case plugs into the motherboard? I would suggest unplugging it, cleaning the contacts (with isopropyl alcohol, just using a dry cotton bud won't do much).

My first thought is still some kind of mechanical fault with the switch - I had something similar with my A1XE.

You might need to take it to a local PC repair store. They will be baffled by the unusual motherboard but they should be able help with a power switch problem.

As for the clock, mine eventually came right, although I suspect that it is Time Prefs updating the clock on boot from the ntp server.

@MamePPCA1

maybe using and "old" 7Z client for xadmaster.library?

http://os4depot.net/?function=showfil ... tility/archive/xad_7z.lha

Under <spit>windows</spit> I get an error while trying to uncompress shooter15.7zip, solved by renaming it to shooter15.7z