how to make a shell window be active after boot by default ?

@All
Have some user-kind issue annoy me a little bit : on the boot i load up lot of stuff automatically : dopus4, shell window, amidock, xdock, lots of commodities, etc.

So, once boot in progress, i see the workbench showed up it's face, then dopus4 and shell window runs, then amidock, xdock, commodities start to load up. And once everything loads up, i want my shell window to be active by default, without me needs to touch mouse when i want to type something in the shell window after boot.

Is there anything i can do in the system by saying it something like "once all loads up, make shell window to be active one" ?

ps. The shell window running from user-startup script, as the last entry in. All the other stuff, runs from the WBStartup.

@kas1e

Last started programs should be the active one, should be possible to set the start priority in WBStartup program.

@kas1e
Quote:You could use something likein your User-Startup.
If your last WBStartup program activating it's window takes longer than 3 seconds to start increase the number of seconds in the Wait command.

@kas1e

if you use RAWBInfo, then juts on WBStartup prefs click on entry and you should see "Start priority" and set it to a lower value so it starts last one.

Not sure but think tooltype is "PRIORITY=<value>"

@joerg
Thanks! That did the trick, in my case 6 + were enough.