OS installation under E-UAE

	Bottom Previous Topic Next Topic
Register To Post

(1) 2 »

Valiant

Posted on: 2007/9/27 0:40 #1

Not too shy to talk

Installed 2.04 to a disk partition in E-UAE, but E-UAE is not able to boot with it. Shouldn't it be able to?

Valiant@Camelot
AmigaOne XE, 800Mhz, 1GB, 9250 Radeon, OS4.1u7
Sam440ep, 666Mhz, 512Mb, 9250 Radeon, OS4.1u6
A1-X1000, 1.8Ghz, 1GB, 9250 Radeon, OS4.1x
A1-X5000/40 2.2Ghz, 2GB, Radeon HD 7700, OS4.1 FE ud 2

thomas

Re: OS installation under E-UAE

Posted on: 2007/9/27 10:27 #2

Not too shy to talk

@Valiant

Yes, it's supposed to boot from HDD, even without an installed OS.

However,Quote:

a disk partition

What do you mean by that ?

If this is a real HDD partition on a real Amiga HDD or a HDF in RDB mode, then it has to be flagged as bootable in HDToolbox. Only HDD directories or conventional HDFs boot automatically.

Bye,
Thomas

Valiant

Re: OS installation under E-UAE

Posted on: 2007/9/27 16:10 #3

Not too shy to talk

@thomas

It's a real HDD on a real Amiga. Does it need to be flagged bootable in MediaToolbox within the emulation? I tried flagging it in MediaToolbox on the real Amiga, but it didn't make any difference.

thomas

Re: OS installation under E-UAE

Posted on: 2007/9/27 16:57 #4

Not too shy to talk

@Valiant

Quote:

It's a real HDD on a real Amiga.

How is it added to E-UAE ?

Quote:

Does it need to be flagged bootable in MediaToolbox within the emulation?

Yes. If you used HDToolbox to partition it, then you have to use HDToolbox to flag it bootable.

Quote:

I tried flagging it in MediaToolbox on the real Amiga, but it didn't make any difference.

Do you run E-UAE on that Amiga ? What do you understand by a "real" Amiga ? AmigaOne is not a real Amiga in this context.

Bye,
Thomas

Snuffy

Re: OS installation under E-UAE

Posted on: 2007/9/27 18:18 #5

Just can't stay away

Hi @Valiant
(Amiga2.05)
E-UAE is not able ... messages? ; errors ? .uaerc ?
ISR that KS 2.0+ uses Non SDL Euae.

LiveForIt

Re: OS installation under E-UAE

Posted on: 2007/9/27 18:22 #6

Home away from home

@Valiant

Quote:

flagging it in MediaToolbox on the real Amiga

E-UAE only does support direct IO to cdroms, real partitions are off limit.

What it does support is FileSystem emulation, and Disk image emulation.

(NutsAboutAmiga)

Basilisk II for AmigaOS4
AmigaInputAnywhere
Excalibur
and other tools and apps.

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/3 23:35 #7

Just can't stay away

Maybe is a stupid question but i don't know how to set up a cd-rom in e-uae for the amiga os 4.0 i have set everything and i can run amiga os 3.9 with two partitions but i don't know how to set up a cd-rom drive..

In the config file of e-uae i put these lines :

Quote:

scsi=true
scsi_device=ATAPI

What am i missing ?

Thanks Davide

salass00

Re: OS installation under E-UAE

Posted on: 2007/11/4 8:45 #8

Just can't stay away

@nubechecorre

A CD0 DOSDriver for CacheCDFileSystem (device=uaescsi.device unit=0).

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/4 10:14 #9

Just can't stay away

@salass00

WoW ! Thanks

To enable picasso screen inside the amiga os 3.9 i have to install picasso from the amiga os 3.9 cd ?

Edited by nubechecorre on 2007/11/4 10:32:13

salass00

Re: OS installation under E-UAE

Posted on: 2007/11/4 10:41 #10

Just can't stay away

@nubechecorre

Yes. Select the "uaegfx" driver during install, then replace the rtg.library in LIBS:Picasso96 with the one from E-UAE.

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/4 10:48 #11

Just can't stay away

@salass00

Thanks

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/4 13:49 #12

Just can't stay away

I have set the cd0 icon and in the tooltype i put the lines :
Quote:

DEVICE=uaescsi.device
UNIT=0

It doesn't work.. i have a sii0680ide.device .. is it ok or i have to change some lines ?

Thanks

salass00

Re: OS installation under E-UAE

Posted on: 2007/11/4 14:36 #13

Just can't stay away

@nubechecorre

IIRC you may have to type UAEscsi.device for it to work (exec device and library lists are case sensitive).

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/4 16:00 #14

Just can't stay away

It doesn't work..

Should i edit the cd0 with an edit pad and add the device and unit in the file or it is ok to add them in the tooltype ?

salass00

Re: OS installation under E-UAE

Posted on: 2007/11/4 17:02 #15

Just can't stay away

@nubechecorre

This is the DOSDriver I use:


/***************************************************************/

/*  CacheCDFS mountlist entry ? 2000 Amiga Inc.    */

/***************************************************************/

       FileSystem     = L:CacheCDFS /* The name of the game */

       Device         = "uaescsi.device" /* Name of exec device driver */

       Unit           = 0 /* exec device unit */

       Flags          = 0 /* OpenDevice flags */

       BlocksPerTrack = 351000 /* Unused */

       BlockSize      = 2048 /* True, but unused */

       Mask           = 0x7ffffffe /* Memory mask for direct read */

       MaxTransfer    = 0x1000000 /* Maximum amount of bytes for direct read */

       Reserved       = 0 /* Unused */

       Interleave     = 0 /* Unused */

       LowCyl         = 0 /* Unused */

       HighCyl        = 0 /* Unused */

       Surfaces       = 1 /* Unused */

       Buffers        = 50 /* Number of cache lines */

       BufMemType     = 1 /* MEMF_PUBLIC */

       BootPri        = 2 /* Boot priority for MountCD */

       GlobVec        = -1 /* Do not change! */

       Mount          = 1 /* Mount it immediately */

       Priority       = 10 /* Priority of FileSystem task */

       DosType        = 0x43443031 /* Currently unused */

       StackSize      = 3000 /* Minimum stack required is 3000! */

       Control        = "MD=1 LC=1 DC=8 L LV AL LFC=1 HR=.rsrc NTD AUDIO=Utilities/PlayCD"

   /* The Control field is for special adjustments */

   /* L/S convert all file/volume names to lowercase */

   /* LV/S convert volume names to lowercase */

   /* AL/S Auto-Lower converts only non-Amiga CDs */

   /* LFC/N start converting at this character */

   /* LC/N/A number of blocks per cache line */

   /* DC/N/A number of cache lines for the data cache */

   /* MD/N/A number of blocks, when starting direct read, not using */

   /* the cache. 0 will be a reasonable default (LC*DC+1) */

   /* S/S Do SCSI direct commands, no Trackdisk like commands! */

   /* NC/S Do NOT use TD_ADDCHANGEINT, poll for DiskChange! */

   /* M/S Issue a TD_MOTOR (OFF) command after read */

I wasn't able to post it before as I wasn't at my A1 at the time.

You can place device and unit either in the tooltypes or in the file itself as above. Don't do both though as that will just lead to confusion.

Also I only have "scsi = true" in my E-UAE config. I have no idea what the "scsi_device=ATAPI" option does.

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/4 17:30 #16

Just can't stay away

Thanks now i am working but when i come back to home i' ll try and let you know what happens

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/4 23:38 #17

Just can't stay away

It doesn't work.. i don't know what it could be..

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/4 23:59 #18

Just can't stay away

i make a progress..

Using the tool mounter in os 3.9 i discovered that the units are different from amiga os 4.0. I have the dvd rom and the cd-rw set as 0 and 1. I changed the cd0 icon in devs/dosdrivers but nothing the icon doesn't appear in the workbench..

If i try to mount the dvd or cd-rw from the mounter i get this error message : " Rigid Disk Block not found " but when it tried to read it from the cd i can see the blu light of the cd in the panel led flashing..

What could it be ?

Raziel

Re: OS installation under E-UAE

Posted on: 2007/11/8 11:48 #19

Home away from home

@nubechecorre

Just for the record

Theres a CacheCDFS installer program within
OS39CD:OS39Version/CacheCDFS

I urge everone to use it, as it copies and configs
everythings without much hassle.

If you config'ed your EUAE right, it should work like a
charm. It sure did for me

--

game box/art scans
scummvm infrequent builds

Snuffy

Re: OS installation under E-UAE

Posted on: 2007/11/8 20:57 #20

Just can't stay away

@nubechecorre

Maybe is a stupid question but i don't know how to set up a cd-rom in e-uae for the amiga os 4.0 i have set everything and i can run amiga os 3.9 with two partitions but i don't know how to set up a cd-rom drive..

In the config file of e-uae i put these lines :

Quote:

scsi=true
scsi_device=ATAPI

What am i missing ?

uaescsi.device and BSDsocket.library were two items leftout of OS4 version. I'm pretty sure mentioned this a very long time ago.

Read the docs! CD-ROM works fine. I installed OS3.9 off the CD to build a nice AmiKit/OS4.

Register To Post	(1) 2 »
	Top Previous Topic Next Topic

Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )