MPlayer 1.5 released!

@smarkusg
Quote:
Actually, I did test this when I was testing MPlayer_v1.5_rc2. The same version the link you just gave points to. This version does not have the Amissl crash and works fine. However, I did verify that, indeed, the OS4Depot released version crashes here for me as well. Both the altivec and non-altivec version. Also, I went back and checked the Altivec rc1 version I tested and it crashes when streaming with YouTube as well. Hopefully this info will help you find the problem. What ever is different from the RC2 version seems to be the cause of the issue.

Just as a bit more information. I tried it with both the latest released Amissl and the release before it. It crashes with both versions, so I don't believe it's an Amissl problem.

This is on an X1000.

@ktadd

Thank you for your thorough check.

If you version this at you correctly everything should be simple to find where the cause of the problem lies. The version that is posted on os4depot has been marked as fully working and tested.
As you can see, it has problems. Releasing the RC version for general access proved to be a good decision.
Testing routinely and redistributing the program to users who use different options gives a much better end result - the program works correctly for everyone

Once again, thank you very much for your time. If there are any comments, problems, please feel free to write about it. The Mplayer project is not closed - if anyone has any ideas or would like to add to it, even just ideas or comments, it would be very nice.

Once again, I wish you all a peaceful and Merry Christmas

Thanks to all involved for this new update

Thank you all for the update.

Trying to play a (random) video from a hard drive with this new MPlayer (altivec version) it crashed. (X1000, RadeonHD)

Thanks!

@TSK

Any more info?

@Maijestro
Quote:My -vo amiga is only usable on real hardware, it either requires PIP/overlay support (-vo amiga:mode=0-2) (Merlin, Voodoo, ATI R100/R200, etc.), or at least something with 2D hardware scaling (-vo -amiga:mode=3), i.e. any gfx card but SM502/QEmu.

@samo79

Pause/Play with spacebar dont work in fullscreen mode, just in window mode.

@khayoz

Mmmm it works here in both fullscreen and window mode...
What video driver are you using?
Did you launched MPlayer from MPlayer-GUI or standalone?

In Conf/input.conf check if you have set SPACE to pause

@samo79 @khayoz

Works here with MPlayer 1.5 (latest version) without any problems, video output SDL/comp/wpa in the window and full screen.

@samo79

I launch MPlayer from Odyssey with YT, RX 2.12 drivers,
yes SPACE to pause is in input config.

@khayoz

Quote:

Which video output under MPlayer do you use? If you're not sure, just look in the MPlayer (conf) which is in the MPlayer folder, I don't think it's a driver problem.

I also use MPlayer 1.5 with YT.rexx to stream YouTube videos and again Space works for pausing and fast forwarding and rewinding in window as well as full screen mode.

@khayoz

Check if by any chance you may have another version of MPlayer installed somewhere, maybe YT script are trying to launch another version via AppPath.
Be sure it will use our latest version of the Player and that all paths are correct

@khayoz
I have also checked - it works. here is a video

https://streamable.com/i6d7pb

as @samo79 wrote, check for conflicting mplayer versions

@samo79 @smarkusg
I've got MPlayer in Work:Video/MPlayer/, version 1.5-rc2 (2023-12-27).
In Sys:Prefs/Env-Archive/AppDir MPlayer is directed to the same Work:Video/MPlayer/.
No older version of MPlayer on my X5000.

@Maijestro
I have not touched any config files, plain vanilla download.
Guide me to what you're asking for in MPlayer/Conf/,
I guess you mean the "config" file.

@khayoz
when you open about window it should have VIDEO DRIVER IN USE entry, what driver says?

or if your un it from Shell/CLI:
...
Playing PRUEBAS:Superman.flv.
libavformat version 60.3.100 (internal)
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0
VIDEO: [H264] 640x266 0bpp 25.000 fps 326.2 kbps (39.8 kbyte/s)
VO: [comp_yuv2] Welcome man !
...

@jabirulo
comp_yuv2

@khayoz

Does spacebar works for pausing if you just play a video from MPlayer and not from YT script?
Also does the "p" key (or pause option from MPlayer's menu) works instead?

@samo79

I tested a video from shell and it´s the same problem,
spacebar and "p" works in window mode but not in fullscreen.

@mplayer pause

I did some testing on this today and I saw the same problem.
In full screen space bar or p will not pause the video.

It happens when using the -vo comp, comp_yuv and comp_yuv2 drivers.
-vo sdl and gl video drivers work fine.

This is with version:
MPlayer 1.5-rc2 (12/27/2023)
SVN-r38440-snapshot-11.3.0

Note that this version does not have this problem:
MPlayer 1.5 (08/30/2023)
SVN-r38423-snapshot

X1000 AmigaOS4 Final Update 2 Enhancer 2.2
RadeonHD 7750
Radeon.chip version 5.14