But how can I transfer from MorphOS to AmigaOS 4.1?
Because my pendrive is not usable on MorphOS 3.18.
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
OK I have the files downloaded on an USB Stick several weeks ago.
I think I tried BacItAllUp
What shall I do next?
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Well, PartitionWizard on my system doesn't run anymore. I get a message "This process terminated without replying to the Workbench startup message, this program is probably for CLI use only."
Well...I finally decided to restore my AmigaOS 4.1 FE Update 2 this night.I changed size of DH0: a bit lower and later to its maximum size on MediaToolBox.I've lost my DH0: data,I know.
Then I mounted my 3 partitions with Mounter.
Then I tried to format DH0: and I got this message at the end of the operation:
"Format Confirmation"
"packet request type unknown"
Why this message?
What can I do to restore my 3 partitions?
Note that I am booting with a pendrive.
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Why do you have to mount your partitions with mounter?
Normally you start with your USB key then in Media toolbox you select your disk, you create your partitions, do not forget to press enter at each name modification, you choose your filesystem FFS or SFS2.
You save all these then Media toolbox will ask you to restart, then your previously created disks should be displayed on the Workbench.
You select a disk, right click you choose format the disk and normally it's good, more than to install your system on it.
OK thanks for your information,I will try later if I have time.
And yes to see my HD partitions I have to mount them with Mounter.
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG
Update: Now this evening I tried to execute Media Toolbox and Mounter.On AmigaOS 4.1.It was impossible as when I tried with DirOpus impossible too as the pointer converted from a red pointer to the clock one,without possibilitie to advance.
Apart from this note that when DirOpus is loading I can open my USB Stick and the System icon too,but when all is loaded,I musn't access to Media Toolbox or Mounter .Icon with clock too again.
Hope this can help
Amiga 500 1MB Chip RAM with ACA 500+ACA1232,CD32,Amiga 1300 030/50 Mhz,32MB (now on my hands at least)and Amiga One G3 XE PPC 800 Mhz,ATI Radeon 9250 128 MB,256 MB RAM,Seagate 200 GB HD,2 working DVD drives,X-Arcade double for MAME,Sil0680,4 USB ports,LG