Problem with X5000

Im trying to connect my amiga one x5000 to the internet but having problems. I tried both dhcp and static ip but it wont connect. I get the error "cant add route 192.168.1.1(my router/gateway)object exist. I tried the integrated ethernet on the motherboard and my RTL8169 but get the same error or i/o failure. I know my network works so thats not the problem.

I deleted all configuration under devs/netinterfaces. Seems like it dont accept my routers gateway 192.168.1.1. Any ideas?

@Joeled
Check casual stuff: subnet mask and your own ip. If gateway in your network 192.168.1.1, then adress should be 192.168.1.x (where x from 2 to 254), and subnet mask should be 255.255.255.0.

Also be sure you choose correct driver, as well as hostname resolution (DNS). This one most of the cases the same as gateway.

And just in case check that local address is 127.0.0.1.

Usually all this "can't add route" - mean or wrong main ip/subnet mask, or whole config fucked up, and need to be deleted and made from scratch.

Step by step it can be like this:

1. start prefs:internet

2. Interfaces tab:
check in that window that correct driver set in Device Driver entry, with correct Unit/Port. In the same window check that Static IP mark is hit, and ip address and subnet mask are the ones i show before. Disable DHCP if it set (just for sake of to be sure nothing wrong with).

3. Routes tab:
At the bottom of the window in the Default Gateway Tab you should have 192.168.1.1

4. Hosts tab:
Should be 127.0.0.1 Localhost localhost.my.domain

5. Name resolution tab:
Addres of your DNS, usually same as default gateway.

That all, save, and restart.

@kas1e
Thanks for quick respons.

I tried but now i get network unreachable.
Interface rtl8169 port 0(tried 0 and 1)
Router (auto) 192.168.1.1 Destionation 192.168.1.1
Host 127.0.0.1 Localhost localhost.my.domain
DNS server 192.168.1.1

@kas1e
There was something fucked up with my Zyxel router etc. I changed to another one. Its working now.