OS installation under E-UAE

	Bottom Previous Topic Next Topic
Register To Post

« 1 (2)

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/8 22:32 #21

Just can't stay away

@Snuffy

They should be in the amiga directory inside the uae directory right ?.. if they are not present where i can find them ?

salass00

Re: OS installation under E-UAE

Posted on: 2007/11/8 23:13 #22

Just can't stay away

@nubechecorre

No, they shouldn't. There is no file named "uaescsi.device". The device is created in memory (inside the emulation) by uae when you specify scsi=true in the config file. Same with "bsdsocket.library" (for this you have to set bsdsocket_emu=true).

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/8 23:20 #23

Just can't stay away

@salass00

I don't know what is the problem with my e-uae.. any hint ?

salass00

Re: OS installation under E-UAE

Posted on: 2007/11/8 23:36 #24

Just can't stay away

@nubechecorre

Try commenting out/removing the "scsi_device=ATAPI" line. I don't have it here and I have working CD-Rom in E-uae using uaescsi.device.

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/8 23:39 #25

Just can't stay away

@salass00

This is a part of my output in the shell :

Quote:

SDL sound driver found and configured for 16 bits at 44100 Hz, buffer is 100 ms (17640 bytes).
sii0680ide.devic 2: 'HL-DT-ST' 'DVD-ROM GDR8164B' '0L06' CD-ROM
sii0680ide.devic 3: 'HL-DT-ST' 'CD-RW GCE-8520B ' '1.03' CD-ROM
SCSIDEV: 2 device(s) found
support_scsi = 1 support_ioctl = 0
sii0680ide.device:2 = uaescsi.device:0
sii0680ide.device:3 = uaescsi.device:1
reset at 0
PAL mode, 50Hz (h=227 v=312)
chipmem cleared
SERIAL: period=372, baud=9600, hsyncs=16 PC=f8012e
Fastmem (32bit): mapped @$10000000: 32 MB Zorro III fast memory
Card 1 (ZorroIII) done.
UAEGFX-card: mapped @$12000000
Card 2 (ZorroIII) done.
Filesystem: mapped memory @$e90000.
Card 3 (ZorroII) done.
PAL mode, 50Hz (h=227 v=311)
PAL mode, 50Hz (h=227 v=312)
Mounting uaehf.device 0 (0):
FS: mounted virtual unit DH0 (Work:Emulatori/e-uae/System3)
Mounting uaehf.device 1 (0):
FS: mounted virtual unit DH1 (Work:Emulatori/e-uae/Work3)
FS: System3.9 starting..
FS: Work3.9 starting..
PAL mode, 51Hz (h=227 v=303)
PAL mode, 50Hz (h=227 v=312)
reset at f80dd0
PAL mode, 50Hz (h=227 v=312)
reset at f800d0
PAL mode, 50Hz (h=227 v=312)
Fastmem (32bit): mapped @$10000000: 32 MB Zorro III fast memory
Card 1 (ZorroIII) done.
UAEGFX-card: mapped @$12000000
Card 2 (ZorroIII) done.
Filesystem: mapped memory @$e90000.
Card 3 (ZorroII) done.
Byte put to custom register DD203A PC=11FF828E
Mounting uaehf.device 0 (0):
FS: mounted virtual unit DH0 (Work:Emulatori/e-uae/System3)
Mounting uaehf.device 1 (0):
FS: mounted virtual unit DH1 (Work:Emulatori/e-uae/Work3)
FS: System3.9 starting..
FS: Work3.9 starting..
PAL mode, 51Hz (h=227 v=301)
PAL mode, 50Hz (h=227 v=312)
PAL mode, 60Hz (h=227 v=256)
PAL mode, 50Hz (h=227 v=312)

Raziel

Re: OS installation under E-UAE

Posted on: 2007/11/9 0:20 #26

Home away from home

@nubechecorre

That doesn't really help much as the CDRom will be added
AFTER WB is loaded in.

Please, as i said in PM, post your eUAE config, so we can
rule out problems there first and then we'll see about your
OS39 installation

--

game box/art scans
scummvm infrequent builds

evilrich

Re: OS installation under E-UAE

Posted on: 2007/11/9 5:20 #27

Just popping in

@Snuffy

Quote:

uaescsi.device and BSDsocket.library were two items leftout of OS4 version. I'm pretty sure mentioned this a very long time ago.

The bsdocket.library emulation doesn't work on OS4.0 at the moment, but uaescsi.device does. However, uaescsi.device currently only supports mounting an optical drive (CD-ROM/DVD, etc.) within E-UAE.

If you want to import an existing AmigaOS filesystem to use on E-UAE on AmigaOS, then you'll have to make an image of it and mount it as a hardfile. A partition has to be less than 2GB (on AmigaOS hosts ) for this to work.

Sorry. I don't have time to follow this thread in detail. Email me privately for more advice or, better still, ask on the uae@freelists.org mailing list.

Cheers,
Rich

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/9 13:43 #28

Just can't stay away

@evilrich

i have sent an email with my config file explaining the problem..

@all

This is my config file :

Quote:

kickstart_rom_file=Work:Emulatori/E-UAE/kick31.rom
kickstart_key_file=Work:Emulatori/E-UAE/rom.key
floppy_speed=400
bsdsocket_emu=true
scsi=true
#scsi_device=ATAPI
show_leds=true
joyport0=mouse
joyport1=kbd2
#cpu_type=68020/68881
cpu_type=68060
cpu_speed=max
chipset=aga
chipmem_size=4
gfxcard_size=16
gfx_framerate=1
gfx_width_windowed=640
gfx_height_windowed=480
gfx_width_fullscreen=640
gfx_height_fullscreen=480
gfx_fullscreen_amiga=yes
gfx_fullscreen_picasso=yes
gfx_center_horizontal=true
gfx_center_vertical=true
gfxcard_size=4
gfx_lores=false
gfx_linemode=double
gfx_correct_aspect=true
bogomem_size=0
fastmem_size=0
z3mem_size=32
collision_level=playfields
sound_bits=16
sound_output=normal
sound_frequency=44100
sound_channels=stereo
sound_latency=100
kbd_lang=it
# amiga.screen_type=ask
#amiga.use_dither=false
filesystem2=rw,DH0:System3.9:Work:Emulatori/e-uae/System3,1
filesystem2=rw,DH1:Work3.9:Work:Emulatori/e-uae/Work3,0

Raziel

Re: OS installation under E-UAE

Posted on: 2007/11/9 17:17 #29

Home away from home

@nubechecorre

I see no problems with your config...

Do the following:

Load in eUAE
In a shell, type
version uaescsi.device full
to check if your device is loaded

Check if you got
L:CacheCDFS 42.19 (02.06.1999)

Devs:DosDrivers/CD0
with salass00's post:

/***************************************************************/
/* CacheCDFS mountlist entry ? 2000 Amiga Inc. */
/***************************************************************/
FileSystem = L:CacheCDFS /* The name of the game */
Device = "uaescsi.device" /* Name of exec device driver */
Unit = 0 /* exec device unit */
Flags = 0 /* OpenDevice flags */
BlocksPerTrack = 351000 /* Unused */
BlockSize = 2048 /* True, but unused */
Mask = 0x7ffffffe /* Memory mask for direct read */
MaxTransfer = 0x1000000 /* Maximum amount of bytes for direct read */
Reserved = 0 /* Unused */
Interleave = 0 /* Unused */
LowCyl = 0 /* Unused */
HighCyl = 0 /* Unused */
Surfaces = 1 /* Unused */
Buffers = 50 /* Number of cache lines */
BufMemType = 1 /* MEMF_PUBLIC */
BootPri = 2 /* Boot priority for MountCD */
GlobVec = -1 /* Do not change! */
Mount = 1 /* Mount it immediately */
Priority = 10 /* Priority of FileSystem task */
DosType = 0x43443031 /* Currently unused */
StackSize = 3000 /* Minimum stack required is 3000! */
Control = "MD=1 LC=1 DC=8 L LV AL LFC=1 HR=.rsrc NTD AUDIO=Utilities/PlayCD"
/* The Control field is for special adjustments */
/* L/S convert all file/volume names to lowercase */
/* LV/S convert volume names to lowercase */
/* AL/S Auto-Lower converts only non-Amiga CDs */
/* LFC/N start converting at this character */
/* LC/N/A number of blocks per cache line */
/* DC/N/A number of cache lines for the data cache */
/* MD/N/A number of blocks, when starting direct read, not using */
/* the cache. 0 will be a reasonable default (LC*DC+1) */
/* S/S Do SCSI direct commands, no Trackdisk like commands! */
/* NC/S Do NOT use TD_ADDCHANGEINT, poll for DiskChange! */
/* M/S Issue a TD_MOTOR (OFF) command after read */

Check if this CD0 file is flagged rwed and s and the command
to start is C:Mount.

To test if it works or not you can always do a
assign CD0: dismount to get rid of CD0 and try again
installing it by altering the prefs and double clicking it's
icon

Lets hear how it went

--

game box/art scans
scummvm infrequent builds

Snuffy

Re: OS installation under E-UAE

Posted on: 2007/11/9 18:44 #30

Just can't stay away

Hi @nubechecorre
Don't you want this for mounting CDROM:

filesystem2=rw,DH0:System3.9:Work:Emulatori/e-uae/System3,1
filesystem2=rw,DH1:Work3.9:Work:Emulatori/e-uae/Work3,0
filesystem2=ro,CD0:CD-ROM:CD0:,0

Snuffy

Re: OS installation under E-UAE

Posted on: 2007/11/9 18:49 #31

Just can't stay away

Hi @evilrich

Thanks for the info!

Raziel

Re: OS installation under E-UAE

Posted on: 2007/11/9 19:06 #32

Home away from home

@Snuffy

Quote:

Don't you want this for mounting CDROM:

filesystem2=rw,DH0:System3.9:Work:Emulatori/e-uae/System3,1
filesystem2=rw,DH1:Work3.9:Work:Emulatori/e-uae/Work3,0
filesystem2=ro,CD0:CD-ROM:CD0:,0

As @evilrich wrote:
Quote:

The bsdocket.library emulation doesn't work on OS4.0 at the moment, but uaescsi.device does. However, uaescsi.device currently only supports mounting an optical drive (CD-ROM/DVD, etc.) within E-UAE.

If you want to import an existing AmigaOS filesystem to use on E-UAE on AmigaOS, then you'll have to make an image of it and mount it as a hardfile. A partition has to be less than 2GB (on AmigaOS hosts ) for this to work.

So, we have to help @nubechecorre to mount a CDROM (readable
under OS4) inside his eUAE installation...

Otherwise it would be dead easy, as you already wrote

btw: that mounting as a hardfile was my choice long before
i figured how to mount my OS4 CDROM to eUAE with help of
this thread ... another 600MB HD space saved

--

game box/art scans
scummvm infrequent builds

Snuffy

Re: OS installation under E-UAE

Posted on: 2007/11/9 19:43 #33

Just can't stay away

Hi @Raziel

So, we have to help @nubechecorre to mount a CDROM (readable
under OS4) inside his eUAE installation...

I'm confused

That's what --
filesystem2=ro,CD0:CD-ROM:CD0:,0
does!

How in the hell did I install the OS off OS 3.9 CD? I installed OS 3.5 off off the 3.5 CD too. All this from inside Euae OS 3.1.

Damn, am I doing things I shouldn't be doing? ...

Edited by Snuffy on 2007/11/9 20:01:08

Raziel

Re: OS installation under E-UAE

Posted on: 2007/11/9 20:01 #34

Home away from home

@Snuffy

Oh?

Seems i'm beginning to mix up things again?

Hmm, @nubechecorre, unless you want something special why
don't you try the solution from @Snuffy?

--

game box/art scans
scummvm infrequent builds

nubechecorre

Re: OS installation under E-UAE

Posted on: 2007/11/10 2:06 #35

Just can't stay away

@Raziel

If i put this string as snuffy suggested i can use the cd-rom on my amiga os 3.9 under e-uae, the only problem is that if i eject the cd i have a requester that appears telling me to replace the cd0..

Quote:

filesystem2=ro,CD0:CD-ROM:CD0:,0

I also checked the -uaescsi.device full- version and i got

Quote:

uaescsi.device 1.0

And the Quote:

L:CacheCDFS

is the same as yours

Now i tried checking the flag of the cd0 icon

Register To Post	« 1 (2)
	Top Previous Topic Next Topic

Currently Active Users Viewing This Thread: 1 ( 0 members and 1 Anonymous Users )