I'm not sure if this even qualifies as a UBoot bug, but I can't even view the UBoot options if I have a graphics card plugged into the PCI slot of my ?A1.
I know that this is an old problem that you already know about, but I'm just mentioning it again so that it is not forgotten.
Would it be feasible to have SOME kind of output on the screen even if the battery is dead? I know the hardware/software can't read the battery's voltage but anything would be better than a blank screen. Even just a "Uboot Copyright 2008" would be better than nothing.
Of course it's not a real big problem as most of us know now if we get just a blank screen to change the battery. But it would be nice if it wasn't too hard to implement.
It's a leftover debug output which is removed in the meantime.
Quote:
Would it be feasible to have SOME kind of output on the screen even if the battery is dead? I know the hardware/software can't read the battery's voltage but anything would be better than a blank screen. Even just a "Uboot Copyright 2008" would be better than nothing.
Of course it's not a real big problem as most of us know now if we get just a blank screen to change the battery. But it would be nice if it wasn't too hard to implement.
No, it's not possible, because the early startup hangs when the battery is dead. You can't even get to a stage where you can run the graphics card BIOS. There is nothing I can do about this.
Seriously, if you do want to contact me write me a mail. You're more likely to get a reply then.
I have read a thread on the italian iksnet forum about the possibility to use two videocards on the SAM, the integrated one and another one in the PCI, at the same time, to use two monitors on one machine. M3X mentions that such feature would require a minor change in UBoot, what do you think?
1.) Wasn't there a problem with PCI-GFX-Cards in the MicroA1? Just want to ask, i have a XE.
That problem is a hardware issue. It can be done, as HammerD pointed out; but it doesn't work with USB and IDE DMA enabled.
Quote:
2.) Does UBoot send the "Security Freeze Lock"-Command to all HDDs?
To be honest, I don't have the slightest idea. The code is generic, and I know squad about ATA. Well, it's not quite true, I actually wrote the very first (PIO Mode) version of a1ide.device, but that is so long ago (holy cow... seven years!) that I don't remember squad
Seriously, if you do want to contact me write me a mail. You're more likely to get a reply then.
Hi Rogue, I always forget to report a bug: My A1 XE G4 is connected with monitor, keyboard and mouse using a KVM Ravo for 2 computers. Many times when I do a soft reset with Ctrl+Ar+Al shell AmigaDOS appears and I can't use keyboard or mouse many times in this situation. If OS4 is able to boot until workbench, keyboard and mouse don't work, and the olny hope is a reset from case button of my A1. This bug is present from the first prerelease of OS4 and until now with OS4.1...
I've heard of a similar problem from someone else (I suppose that is a PS/2 switch), but that isn't exactly a U-Boot problem. Please, ONLY report U-Boot related bugs here, as the subject suggests. Thanks.
Seriously, if you do want to contact me write me a mail. You're more likely to get a reply then.
I still don't like the scan of all CDRoms devices at bootup! I occasionally forget to remove audio disc and at next bootup BAM, it takes forever for UBoot to figure out what to do? Can a flag be created to read only one CD/DVD device for Boot1 device and ignore all the others down the line for the normal HD bootup?
When users are using Sii cards and disabling Via IDE completely make UBoot to set also ide_maxbus=0. It takes a lot of time to scan empty Via IDE bus. People have asked this quite a lot lately.
Rock lobster bit me - so I'm here forever X1000 + AmigaOS 4.1 FE "Anyone can build a fast CPU. The trick is to build a fast system." - Seymour Cray
I still don't like the scan of all CDRoms devices at bootup! I occasionally forget to remove audio disc and at next bootup BAM, it takes forever for UBoot to figure out what to do? Can a flag be created to read only one CD/DVD device for Boot1 device and ignore all the others down the line for the normal HD bootup?
I should have set up a bugtracker for this
I'll try to come up with something for this one.
Seriously, if you do want to contact me write me a mail. You're more likely to get a reply then.
TSK has just reminded me. There's no way to set the bootdelay variable from the menu, only menu_bootdelay. I would question why we need two delays (personally I switch the first one off) but aside from that, the inital bootdelay should be settable from the menu.
There's no way of setting boot args separately for Amiga Boot and Linux Boot (not sure whether it is worth the effort to fix this one, people should be using the SLB to boot Linux on dual-boot systems!)
News feed
OS4 Feedback forum
OS4Depot Feedback forum
Amigabounty forum
OpenAmiga forum
AmiCygnix forum
ABC shell forum
AmiKit forum
Cinnamon Writer forum
CodeBench forum
Digital Universe forum
Dopus 5 forum
E-UAE forum
Gnash forum
Ibrowse forum
JAmiga forum
Odyssey forum
OWB forum
Qt forum
SmartFileSystem forum
Timberwolf forum
TouchDevice forum
TuneNet forum
Unsatisfactory Software forum
Donate
