Hello, I've purchased AGP Radeon 9250 with 256MB RAM. The OS4.0 Screenmode shows 1280x1024 32bit as a maximum resolution. How can I set it to 1680x1050 according to my LCD? I assume the Radeon is capable of displaying such a resolution, right?
However the screen is now shifted to the right. I adjusted it manually using the monitor's controls but it's not enough, the screen is still shifted a bit to the right. I can see only half of the screen-depth button.
Is there something like OS3.x Overscan Preferences in OS4.0? Or is there any other possibility how to fix it?
However the screen is now shifted to the right. I adjusted it manually using the monitor's controls but it's not enough, the screen is still shifted a bit to the right. I can see only half of the screen-depth button.
The monitor is LG L206WTQ, the autoset feature of the monitor centers the screen for a few seconds only and then it shifts to the right...
I have LG 204. Make sure your monitor has recognized the screen mode correctly and do that auto adjust then again. If it hasn't recognized the screen mode and you have an input switch in your monitor try switching between analog and digital inputs as many times as is required it to recognize correct screen mode. Or open another screen on your Amiga which has different resolution than Workbench and switch between those screens as many times is needed your monitor to recognize the screen mode. Or if you have a Linux/Winblows box (or Linux installed on your Amiga) you could try to use them to adjust your monitors settings and then switch back to your Amiga (and don't touch auto adjust button ever again .
Quote:
Okay, one more reason to buy OS4.1.
DVI works perfectly with AOS4.1. I don't have any problems with it.
Rock lobster bit me - so I'm here forever X1000 + AmigaOS 4.1 FE "Anyone can build a fast CPU. The trick is to build a fast system." - Seymour Cray
I have the same graphics card and the problem I have (since OS4 and still on OS4.1) is this:
When the OS4.1 bootscreen appears, the display appears shifted to the left with a think white line/border down the right handside of the screen.
The problem also occurs when I run a Hollywood script on it's own screen and with Quake 1/2 on it's own screen.
As mentioned, I've had this problem since OS4 with the 9250 graphics card (I had an 8500LE before this, since donated to Mick the Greek (MikeyC) which did not share this problem)
However the screen is now shifted to the right. I adjusted it manually using the monitor's controls but it's not enough, the screen is still shifted a bit to the right. I can see only half of the screen-depth button.
Is there something like OS3.x Overscan Preferences in OS4.0? Or is there any other possibility how to fix it?
goto the Screenmode preferences and tick the "Default" Width and Height gadget
Thank you all for the input on this. My old CRT died last night, and thanks to the info here, I now have a new LG 22 inch flat/wide-screen up and running nicely at 1680 x 1050.
Paul
Builder of Frankenthousand The monster A1000 The Young Frankenthousand A1-XE G4 X5000
News feed
OS4 Feedback forum
OS4Depot Feedback forum
Amigabounty forum
OpenAmiga forum
AmiCygnix forum
ABC shell forum
AmiKit forum
Cinnamon Writer forum
CodeBench forum
Digital Universe forum
Dopus 5 forum
E-UAE forum
Gnash forum
Ibrowse forum
JAmiga forum
Odyssey forum
OWB forum
Qt forum
SmartFileSystem forum
Timberwolf forum
TouchDevice forum
TuneNet forum
Unsatisfactory Software forum
Donate
.
