GrimReaper with AmiCygnix

Actually, it used to work pretty well for me -- and i mainly use it for remotely starting some
programms like skype. However, I didn't used Amicygnix for several weeks now. Today,
tried to start it again and get the following GR, which cannot be ignored (AOS4 freezes completely):

Crash log for task "Cygnix:CygnixPPC/X11R6.3/bin/Esetroot"
Generated by GrimReaper 53.2
Crash occured in module Esetroot at address 0x6ED5D3CC
Type of crash: DSI (Data Storage Interrupt) exception

Register dump:
GPR (General Purpose Registers):
0: 6EC44FC4 52786950 00000000 80000000 00004B00 000003FF 00000000 00000040
8: 5712D200 00000000 000000C8 5712D154 0000016C 56012E00 00000000 56010000
16: 57128448 56010000 56010000 00000000 52786A20 56010000 00000060 571273A8
24: 00000064 56010000 56010000 56010000 56000000 5712D190 00000010 52786950


FPR (Floating Point Registers, NaN = Not a Number):
0: nan 8.96835e-44 2.8481e-306 7.29113e-304
4: 8.53558e-270 1.87021e-301 6.91771e-312 3.32897e+78
8: 5.38393e-104 6.06641e+206 2.56256e-189 nan
12: 2.122e-314 4.39838e-315 0 0
16: 0 0 0 0
20: -4.57466e-306 0 0 0
24: 0 0 0 0
28: 1.55795e-285 0 0 0

FPSCR (Floating Point Status and Control Register): 0x82000000


SPRs (Special Purpose Registers):
Machine State (msr) : 0x0002F030
Condition (cr) : 0x48422022
Instruction Pointer (ip) : 0x6ED5D3CC
Xtended Exception (xer) : 0x20000008
Count (ctr) : 0x00000003
Link (lr) : 0x6EC44FC4
DSI Status (dsisr) : 0x00000000
Data Address (dar) : 0x00000054



680x0 emulated registers:
DATA: 5FFAB318 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ADDR: 52786F48 55FD1020 00000000 00000000 00000000 00000000 00000000 52786D30
FPU0: 0 0 0 0
FPU4: 0 0 0 0



Symbol info:
Instruction pointer 0x6ED5D3CC belongs to module "Esetroot" (HUNK/Kickstart)

Stack trace:
module Cygnix:CygnixPPC/X11R6.3/bin/Esetroot at 0x6ED5D3CC (section 5 @ 0x1543AC)
module Cygnix:CygnixPPC/X11R6.3/bin/Esetroot at 0x6EC44FC4 (section 5 @ 0x3BFA4)
module Cygnix:CygnixPPC/X11R6.3/bin/Esetroot at 0x6EC2F640 (section 5 @ 0x26620)
module Cygnix:CygnixPPC/X11R6.3/bin/Esetroot at 0x6EC1D084 (section 5 @ 0x14064)
module Cygnix:CygnixPPC/X11R6.3/bin/Esetroot at 0x6EC0CDC0 (section 5 @ 0x3DA0)
module Cygnix:CygnixPPC/X11R6.3/bin/Esetroot at 0x6EC09B00 (section 5 @ 0xAE0)
native kernel module newlib.library.kmod+0x00001f4c
native kernel module newlib.library.kmod+0x00002b98
native kernel module newlib.library.kmod+0x00002d5c
_start()+0x1A4 (section 1 @ 0x1a4)
native kernel module dos.library.kmod+0x0001b524
native kernel module kernel+0x00036290
native kernel module kernel+0x00036310



I can provide the full GR log if of any help.
But maybe someone can already tell me what's wrong?


Thanks a lot,
nexus


Edit: System: Sam440ep, AOS 4.1.2

@nexus

please check, if the libraries "sysvipc.library" and "threads.library" are still in LIBS:. The libraries are included in the base archive (directory "install-data/libs").

@cygnusEd

Actually, yes, they are still in the libs dir.
However, for some reasons, there was no assign anymore to that directory.
Now it works again.

Thanks, although, I don't know what has changed in the last week


regards,
nexus

@nexus

I had problems after update2, just needed to re-install it from my backup. Never did figure out what changed.