NetSurf 3.0-dev

Re: NetSurf 3.0-dev

Posted on: 2010/10/22 14:49 #21

Home away from home

@kas1e

Quote:

Unpacking, and run without installation "netsurf" binary. IT ask me for screenmode. But imho will be cool, if by default it will be opens on the current WB screen

Agree, also if you press cancel, NetSurf open itself into a new screen instead of just close the requester, not a big problem aniway ...

Re: NetSurf 3.0-dev

Posted on: 2010/10/22 18:54 #22

Amigans Defender

@Raziel

Quote:

When i open web.deNS opens an empty window in the size of the program window right on top of NS and completely dead-locks the whole machine

Hmm, works here, but I have IFrames switched off as they really annoy me.

Try opening Resources/Options and adding/editing the following line:
no_iframes:1

Otherwise if you can run NetSurf with the following command and send me the logfile (you might want to redirect to a partition rather than ram: to retain the file after a reboot, but please use one with nothing on you care about and preferably SFS or JXFS):

netsurf -v *>ram:ns.log

I might be able to figure out the problem then.

Chris

Raziel

Re: NetSurf 3.0-dev

Posted on: 2010/10/22 20:12 #23

Home away from home

@Chris

Sent to your email addy

thanks for looking

--

game box/art scans
scummvm infrequent builds

Re: NetSurf 3.0-dev

Posted on: 2010/10/24 4:42 #24

Just popping in

@Chris

I downloaded and installed 2.6 today, with little trouble (well, it seems I have to keep replacing the same SObjects--libz.so and libmng.so.1--I don't know what keeps happening to them).

But I do have one mysterious and nasty problem--it doesn't show jpegs. Instead, it reports

Wrong JPEG library version: library is 62, caller expects 80

Also, I tried replying to this from NetSurf, but no edit window window came up.

Re: NetSurf 3.0-dev

Posted on: 2010/10/24 9:53 #25

Amigans Defender

@kilaueabart

Quote:

Wrong JPEG library version: library is 62, caller expects 80

Erm... that should never happen.

NetSurf is linked against libjpeg.so.8 intentionally to avoid this problem (incidentally libmng.so.1 would have been replaced as I've relinked it against libjpeg.so.8 too).

All I can suggest is,
* Make sure NetSurf really is v2.6 (Project=>About)
* Manually copy libjpeg.so.8 from the NetSurf archive into SObjs: replacing whatever is there
* Make sure there is no libjpeg.so.8 in NetSurf's own drawer

Re: NetSurf 3.0-dev

Posted on: 2010/10/25 0:14 #26

Just popping in

@Chris

Quote:

Chris wrote:
@kilaueabart

All I can suggest is,
* Make sure NetSurf really is v2.6 (Project=>About)
* Manually copy libjpeg.so.8 from the NetSurf archive into SObjs: replacing whatever is there
* Make sure there is no libjpeg.so.8 in NetSurf's own drawer

I must be doing something terribly stupid.

I did check Project => About before reporting the problem.

Instead of copying as you suggest, I went back to the archive and dearchived only libjpeg.so.8 into SObjs. Shouldn't that be the same?

There was no libjpeg.so.8 in NetSurf/, but there was a libjpeg.so; I deleted it and clicked the NetSurf icon again, and the complaint was "no libjpeg.so"!

I emptied NetSurf/ leaving only the Resource and ARexx drawers (I should have left NetSurf.info too--I'm back to the screwdriver icon) and from a RAM:-based dearchive, I ran Install, with everything going to NetSurf/. The install ended with;
___________________________________
Install (100% done)
The following shared objects failed to copy. These will be updated on next reboot.
libz.so.1.2.5
-----------------------------------------------------
So I rebooted.

Now I am back to the old "Failed to load shared object libz.so" and "Failed to load shared object libmng.so.1." Previously when I got those messages, I copied said files from an OS4.1 backup. In fact libmng.so.1 is still in SObjs:, but no libz.so, only libz.so.1.1, libz.so.1.2.3, and libz.so.1.2.5. Oh, I did get a message during install that the libmng.so.1 to be copied had a newer date than the one to be replaced. Sounded fine to me, so I said go ahead.

Re: NetSurf 3.0-dev

Posted on: 2010/10/25 17:53 #27

Amigans Defender

@kilaueabart

There's a problem with the link creation in the install script, which can mess up libz.so. You shouldn't need to copy anything back, just delete libz.so (and .1 etc - leaving only libz.so.1.2.5), then run:
makelink sobjs:libz.so libz.so.1.2.5 soft
makelink sobjs:libz.so.1 libz.so.1.2.5 soft
makelink sobjs:libz.so.1.2 libz.so.1.2.5 soft

I don't know why libmng.so.1 is going wrong though. It could quite possibly be because it depends on libz.so (and libjpeg.so.8).

Use readelf (from the SDK) or listdyndep (available from OS4Depot) on NetSurf and libmng.so.1.

NetSurf should give you a list like this (wow, what a lot of dependencies!)


libjpeg.so.8

  libmng.so.1

  libz.so

  libnsbmp.so.0

  libnsgif.so.0

  libpng12.so

  libsvgtiny.so.0

  liblcms.so

  libvpx.so.0

  libxml2.so

  libcurl.so

  libpthread.so

  libssl-0.9.8.so

  libhubbub.so.0

  libcss.so.0

  libparserutils.so.0

  libwapcaplet.so.0

  libiconv.so

  libdl.so

  libcairo.so

  libpixman-1.so

  libfreetype.so

  libfontconfig.so

  libexpat.so

  libgcc.so

  libc.so

Check you have libjpeg.so.8 not libjpeg.so listed. Do the same with libmng.so.1


libjpeg.so.8

  libz.so

  libc.so

  liblcms.so

  libgcc.so

Make sure it says libjpeg.so.8 and you have all the other files listed.

Chris

Re: NetSurf 3.0-dev

Posted on: 2010/10/27 0:02 #28

Home away from home

@Chris

I have this error each time i start a second NetSurf session (starting it from AmiDock) when another one is open

Quote:

assertion "object->users != NULL" failed: file "content/llcache.c", line 1173

This message happen only in latest pubblic version, any tips ?

Re: NetSurf 3.0-dev

Posted on: 2010/10/27 22:50 #29

Amigans Defender

@samo79

I'll check it out when I get a minute.

Re: NetSurf 3.0-dev

Posted on: 2010/10/28 4:05 #30

Home away from home

@Chris

No hurry Chris

Similar problem, sometimes starting NetSurf from AmiDock cause (recoverables) GRs

Quote:

Crash log for task "NetSurf"
Generated by GrimReaper 53.2
Crash occured in module at address 0x6B3A0668
Type of crash: ISI (Instruction Storage Interrupt) exception

Register dump:
GPR (General Purpose Registers):
0: 6C3FD47C 4C70A270 00000000 43685648 00000000 00000064 4B633AE4 00000047
8: 4D22F944 00000000 43685478 021BD806 FFFFC000 4C6CE500 00000000 00000000
16: 4D22F000 6F3B3854 00000000 1577F8AC 02270000 00340014 02270000 00000014
24: 00000000 4DAAC612 00000000 00000000 00000000 4B633AE4 4B65DC78 43685648

FPR (Floating Point Registers, NaN = Not a Number):
0: nan 1.33724e-152 7.19675e+159 1.1062e+224
4: 9.29982e+199 2.13782e+161 2.97254e+222 1.17364e+214
8: 1.5185e-152 5.71655e+290 4.91372e+252 5.30483e+180
12: 1.64155e+267 2.50278e+262 0 -0
16: 0 0 0 0
20: 0 0 0 1.61895e-319
24: 1.58101e-322 0 0 0
28: 5.05923e-321 1.35808e-312 8.6917e-311 3.55817e+21

FPSCR (Floating Point Status and Control Register): 0x82000000

SPRs (Special Purpose Registers):
Machine State (msr) : 0x0002F030
Condition (cr) : 0x42002084
Instruction Pointer (ip) : 0x6B3A0668
Xtended Exception (xer) : 0x20000002
Count (ctr) : 0x01814BA4
Link (lr) : 0x6C3FD498
DSI Status (dsisr) : 0x00000000
Data Address (dar) : 0x43685648

680x0 emulated registers:
DATA: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ADDR: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
FPU0: 0 0 0 0
FPU4: 0 0 0 0

Symbol info:
Instruction pointer 0x6B3A0668 belongs to module "" (HUNK/Kickstart)

Stack trace:

module AmigaOS4:SObjs/libssl-0.9.8.so at 0x6C401FB4 (section 0 @ 0x8AFB8)
module AmigaOS4:SObjs/libssl-0.9.8.so at 0x6C4001A4 (section 0 @ 0x891A8)
libcurl.so:Curl_ossl_init()+0x10 (section 9 @ 0x1ae78)
libcurl.so:Curl_ssl_init()+0x40 (section 9 @ 0x2df00)
libcurl.so:curl_global_init()+0xAC (section 9 @ 0x23ec0)
NetSurf:fetch_curl_register()+0x90 (section 10 @ 0x4127c)
NetSurf:fetch_init()+0x18 (section 10 @ 0x3f438)
NetSurf:netsurf_init()+0x370 (section 10 @ 0x74920)
NetSurf:main()+0x64 (section 10 @ 0xd370)
native kernel module newlib.library.kmod+0x00001f4c
native kernel module newlib.library.kmod+0x00002be0
native kernel module newlib.library.kmod+0x00002d5c
NetSurf:_start()+0x170 (section 10 @ 0x170)
native kernel module dos.library.kmod+0x0001b524
native kernel module kernel+0x00036290
native kernel module kernel+0x00036310

Re: NetSurf 3.0-dev

Posted on: 2010/10/28 17:36 #31

Amigans Defender

@samo79

Quote:

Similar problem, sometimes starting NetSurf from AmiDock cause (recoverables) GRs

That's a problem with the dynamic linker I think. Sometimes it either doesn't load or doesn't link shared objects properly. It mostly affects libssl but I've seen it with libcairo too. Didn't know it was recoverable, usually if that happens it's best to reboot.

Chris

RacerX

Re: NetSurf 3.0-dev

Posted on: 2010/10/29 2:09 #32

Just popping in

@Chris

Quote:

Chris wrote:
@RacerX

Works here. Try setting no_iframes:1 in Resources/Options.

That works for the My Coke Rewards site. Now THIS site doesn't work:

C64.com

Slightly different crash. It puts up 2 grey windows just before it crashes. The mouse pointer also locks up. 'Three fingered salute' WILL reset.

I didn't try if before changing the no_iframes setting so I don't know if that made a difference or not.

'non fixed' A1XE, USB card, Sil 0680 IDE, 512mb RAM, Radeon 9250, OS4.1 Update 5

Re: NetSurf 3.0-dev

Posted on: 2010/10/29 17:59 #33

Amigans Defender

@samo79

Quote:

assertion "object->users != NULL" failed: file "content/llcache.c", line 1173

Fixed.

@RacerX

I'm just going to hope that frames get moved to the core before the next release I think. I'll start worrying about it if that looks like it isn't going to happen. I've had it with frames, they cause more problems than they solve.

Re: NetSurf 3.0-dev

Posted on: 2010/10/29 18:13 #34

Home away from home

@Chris

How quick, bravo !

Quote:

I'm just going to hope that frames get moved to the core before the next release I think. I'll start worrying about it if that looks like it isn't going to happen. I've had it with frames, they cause more problems than they solve.

I hope too, frames missing cause a lot of problems, for example when you search somethings on google or all that strange popup windows without any gadgets :-/

Re: NetSurf 3.0-dev

Posted on: 2010/10/29 21:42 #35

Amigans Defender

@samo79

Quote:

samo79 wrote:
@Chris

How quick, bravo !

It wasn't me who fixed it.

Re: NetSurf 3.0-dev

Posted on: 2010/11/5 2:21 #36

Just popping in

@Chris

Quote:

Chris wrote:
@kilaueabart

There's a problem with the link creation in the install script, which can mess up libz.so. You shouldn't need to copy anything back, just delete libz.so (and .1 etc - leaving only libz.so.1.2.5), then run:
makelink sobjs:libz.so libz.so.1.2.5 soft
makelink sobjs:libz.so.1 libz.so.1.2.5 soft
makelink sobjs:libz.so.1.2 libz.so.1.2.5 soft

What I get for those is essentially the same.

7.OS41:> makelink sobjs:libz.so libz.so.1.2.5 soft
MAKELINK: too many levels

Quote:

Use readelf (from the SDK) or listdyndep (available from OS4Depot) on NetSurf and libmng.so.1.

Since I had readelf lying around anyway, I tried it with each of the options. None gave anything like what you say below. I thought I would read the manual, but gave up. Surely there must be a way to view the manual without all the format coding? (So many things I don't know and probably won't have time to learn in my last 12 +/-12 years.)

I'll go after listdyndep later, but if I can't do the makelinks, there is probably no rush.

I just noticed something I hadn't seen before. There is a NetSurf drawer (from October 24) in Sys:SObjs/, containing another SObjs/ with only (a second) libjpeg.so.8 in it. Surely something (trivially) wrong here?

Quote:

NetSurf should give you a list like this (wow, what a lot of dependencies!)

[code] libjpeg.so.8
libmng.so.1
libz.so
[...]
Chris

Re: NetSurf 3.0-dev

Posted on: 2010/11/6 9:22 #37

Amigans Defender

@kilaueabart

Quote:

What I get for those is essentially the same.

Oops, I messed up there. Should be:
makelink sobjs:libz.so sobjs:libz.so.1.2.5 soft
(etc)

The correct switch for readelf is -d.

And finally...
Quote:

There is a NetSurf drawer (from October 24) in Sys:SObjs/, containing another SObjs/ with only (a second) libjpeg.so.8 in it.

That shouldn't happen. Is it like that in the archive?

kas1e

Re: NetSurf 3.0-dev

Posted on: 2010/11/6 9:34 #38

Home away from home

@Chris

After reading all that posts about problems with sobjs from some users: maybe will be not bad idea to provide 2 bins: one which used shared libs, and one in which everything compiles statically. Because all that jpeg08-010-129 problems can scare some users for sure.

Join us to improve dopus5!
AmigaOS4 on youtube

Re: NetSurf 3.0-dev

Posted on: 2010/11/6 9:59 #39

Amigans Defender

@kas1e

There is already - the "grapics.library/static" version is all static libs.

libjpeg - I'm using v8 intentionally to avoid such conflicts.