UBOOT 1.0.0 ISO needed

Is there anywhere I can get this ISO so I can update from 0.1.1 to 1.0.0 and then 1.1.1?
The AmigaOne g4 XE I just bought didn't have the flash or OS 4. It was won at an event and he never received his version of OS4.

http://hyperion-entertainment.biz/
There is no need to install 0.1.1 and/or 1.0.0 before 1.1.1.

I read it in the OS4 Installation manual:
Cut And Pasted from the manual.
To update to U-Boot V1.1.1 your AmigaOne requires to be at U-Boot V1.0.0 first.
For an AmigaOne with U-Boot V0.1 you will be required to make Two (2) U-Boot updates, firstly to U-Boot V1.0.0 and then to U-Boot V1.1.1
For an AmigaOne With U-Boot V1.0.0 you will be required to make One (1) U-Boot update, to U-Boot V1.1.1

For Example:

Updating to U-Boot V1.0.0 from U-Boot V0.1 use the "From 0.1" image. in the Firmware/UBoot1.0 directory.

Updating to U-Boot V1.1.1 from U-Boot V1.0.0 use the image in the Firmware/UBoot1.1 directory.


When I apply 1.1.1 it flashes some info and resets the computer bringing me back to the prompt?
If the ROM is LOCKED what usually happens when you try to FLASH it?

Ask on the Hyperion forum or send a email to hjf.

I went to hyperion and tried to register.
It emails saying I have to REG a product.
I don't have a product to register just the AmigaOne-XE board I bought used.

Just go to the downloads area of their site. There are several things, like AmigaOne firmware and OS4 SDK, which you can download without having to register any product or even login. It looks like they only have the most current Mar 2005 version there.

@GreenMeanie,

You should register your A1-XE, it IS a product you can register. I don't recall the early bird OS4 had a serial number

Chris

Is Uboot version 1.1.1 the same thing as Uboot March 2005 ?

I only Can get 1.1.1 bot 1.0.0 from the Download area.

GreenMeanie,
As I mentioned to Tony Wyatt at AW:
Yes, the earliest versions were write-locked...
I remember that! Back in 2003, the A1 was shipped with that ROM. I had to buy a new one from my dealer, CompuQuick in Ohio. It was the same 1.0.0 version, but a writetable/flashable ROM. Yuk, for the A1 Linux box...
When OS4 'pre-release' in July 2004 came, the UBoot had to updated to 1.1.0 to install OS4 Pre., ISTR. Official OS4 release in 2005 bumped it up to 1.1.1.

All you need is writeable/flashable ROM before updating UBoot to version 1.1.1