SATA device timeout on Sam440ep-flex

	Bottom Previous Topic Next Topic
Register To Post

trixie

Posted on: 2012/5/1 17:55 #1

Amigans Defender

A good deal of the boot-time on my new Sam440ep-flex is taken by waiting for (unconnected) SATA devices to timeout. Is there an UBOOT setting or an env-variable to disable it?

The Rear Window blog

AmigaOne X5000 @ 2GHz / 4GB RAM / Radeon RX 560 / ESI Juli@ / AmigaOS 4.1 Final Edition
SAM440ep-flex @ 667MHz / 1GB RAM / Radeon 9250 / AmigaOS 4.1 Final Edition

Amigo1

Re: SATA device timeout on Sam440ep-flex

Posted on: 2012/5/1 22:02 #2

Quite a regular

Great idea, I'd like to know about such a env-var too.

And while I'm at it, sorry for hijacking your tread: I'm looking for the UBoot env to enable the internal UBoot J19a, J19b and J17. I misplaced them..

broadblues

Re: SATA device timeout on Sam440ep-flex

Posted on: 2012/5/2 0:58 #3

Home away from home

Quote:

sii3114ide_conf

Compose 4 chars (prim master, prim slave, sec master, sec slave) using :

0 : nothing
1 : harddisk
2 : dvd/cdrom reader or burner

Default : if you don't set this envvar, sii3114ide will scan the IDE buses and
try to determine the configuration by itself.

Quote:

- sii3114ide_timeout

Legal values are between 1 and 30 (seconds). The latter is the recommended
value from the ATA(PI) spec.

Default : if you don't set this envvar, sii3114ide will use a 20 second timeout.

sys:Documentation/IDE/

Blender For OS4.x : Blues : Walker Broad

m3x

Re: SATA device timeout on Sam440ep-flex

Posted on: 2012/5/2 8:52 #4

Just popping in

Set the following u-boot var:

s4sii_maxbus = 1

Max Tretene, ACube Systems Srl, Soft3

Slayer

Re: SATA device timeout on Sam440ep-flex

Posted on: 2012/5/2 8:53 #5

Quite a regular

removed

Edited by Slayer on 2012/5/2 11:54:28

~Yes I am a Kiwi, No, I did not appear as an extra in 'Lord of the Rings'~
1x AmigaOne X5000 2.0GHz 2gM RadeonR9280X AOS4.x
3x AmigaOne X1000 1.8GHz 2gM RadeonHD7970 AOS4.x

trixie

Re: SATA device timeout on Sam440ep-flex

Posted on: 2012/5/2 11:19 #6

Amigans Defender

Quote:

m3x wrote:
Set the following u-boot var:

s4sii_maxbus = 1

Thanks Max, that did the trick!

The Rear Window blog

AmigaOne X5000 @ 2GHz / 4GB RAM / Radeon RX 560 / ESI Juli@ / AmigaOS 4.1 Final Edition
SAM440ep-flex @ 667MHz / 1GB RAM / Radeon 9250 / AmigaOS 4.1 Final Edition

Register To Post
	Top Previous Topic Next Topic

Currently Active Users Viewing This Thread: 2 ( 0 members and 2 Anonymous Users )