fastfix for 1.23

Well done, works good here

Copying site address with pull down menu works magically now.

Thanks a lot Kas1e and sinisrus aussi !

@ddni

just copy over the complete conf drawer from the former version.

regards...
michael

@kas1e

You're doing a very good job. Thank you.

@kas1e


Thanx Pal, very very good job!!!

Hi Roman, sorry but I'm really busy that period. Anyway, till last time I hadn't any freezes so far.

Google search always starts in mobile version, is that normal?

@Phantom

Hi Antony to you had been check the prefernce of the Odyssey if you have the default browser as Iphone or ipad spoofed?

@kas1e

Thanks for the update!

@sinisrus

Thanks for the fast sites mod, like this feature of Odyssey a lot.

Odyssey 1.23 Release 2 is working very well on my X1000. Really fantastic job with this project! I really wish everything in Amigaland moved so fast as this effort has. It was money well spent for the bounty to secure the source.

By the way, I enabled the YouTube Fullscreen Fix script and even though I cannot do overlay with my RadeonHD card (alas, sigh) this script does seem to have the pleasant side effect of making more videos play in the HTML5 viewer. Before, it was a crapshoot.

Still trying to stress out this program by visiting every site on the Internet that caused me grief with past versions, but so far in my testing it has performed to exceed expectations and bring a smile. :)

@kas1e

Thank you for your great efforts to port Odyssey 1.23 to OS4.1!

I still get a lot of errors and DSIs with Odyssey 1.23 on my system. Below is one such example. I think maybe I need an update to the icon system used by Odyssey..I have seen issues with Icon data in some of the DSI messages. Anyway, does this reveal anything? I am using a micro A1 with 512M of RAM. This is the 2nd Odyssey 1.23 you put on OS4Depot.


Crash log for task "Odyssey"
Generated by GrimReaper 53.16
Crash occured in module Odyssey at address 0x7E935D60
Type of crash: DSI (Data Storage Interrupt) exception

Register dump:
GPR (General Purpose Registers):
0: 7E935D50 62F04940 39296480 5F469078 6FDA0410 FE502A80 5335A873 00073656
8: 00000007 DFEBFBB8 000000F0 01DB6876 000F4240 6094FAB0 00000000 60C8C340
16: 7D47B094 00000000 00000000 00340014 01E70000 01E70000 18356BC4 60948988
24: 62F04C88 622DC024 62A5B9C0 62A5B978 60954018 606C4BB0 60885BE8 5F469020


FPR (Floating Point Registers, NaN = Not a Number):
0: nan 1.39604e+09 0 0
4: 386 719 879 879
8: 0 1 1 0.0046289
12: 0 99.2686 -2.13823e-86 -4.3914e-135
16: -2.57809e+206 -7.35148e-113 -2.04549e+226 -1.44723e+174
20: -1.76558e+58 -3.17604e+71 -7.63092e+212 4.68485e+81
24: 3.08707e-189 -3.12628e+183 -2.14424e+192 5.6887e+61
28: 0 0 1.39604e+09 0

FPSCR (Floating Point Status and Control Register): 0xA2004100


SPRs (Special Purpose Registers):
Machine State (msr) : 0x0000F030
Condition (cr) : 0x5B507390
Instruction Pointer (ip) : 0x7E935D60
Xtended Exception (xer) : 0x01426FAC
Count (ctr) : 0x00000000
Link (lr) : 0x00000000
DSI Status (dsisr) : 0x014450EC
Data Address (dar) : 0x00000000



680x0 emulated registers:
DATA: 6350CCAE 00000003 00000000 00000000 00000000 00000000 00000000 00000000
ADDR: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 62F042F0
FPU0: 0 0 0 0
FPU4: 0 0 0 0



Symbol info:
Instruction pointer 0x7E935D60 belongs to module "Odyssey" (PowerPC)
Symbol: _ZN3JSC4Heap21deleteAllCompiledCodeEv + 0xC4 in section 1 offset 0x014BBD3C

Stack trace:
_ZN3JSC4Heap21deleteAllCompiledCodeEv()+0xc4 (section 1 @ 0x14BBD3C)
_ZN3JSC4Heap21deleteAllCompiledCodeEv()+0xb4 (section 1 @ 0x14BBD2C)
_ZN3JSC4Heap17collectAllGarbageEv()+0x3c (section 1 @ 0x14C03F0)
_ZN7WebCoreL7collectEPv()+0x64 (section 1 @ 0x22BBC0)
_ZN7WebCore12GCController12gcTimerFiredEPNS_5TimerIS0_EE()+0x30 (section 1 @ 0x22BC1C)
_ZN7WebCore5TimerINS_12GCControllerEE5firedEv()+0x30 (section 1 @ 0x22BF10)
_ZN7WebCore12ThreadTimers24sharedTimerFiredInternalEv()+0x178 (section 1 @ 0x1E1DFC)
_ZN7WebCore12ThreadTimers16sharedTimerFiredEv()+0x44 (section 1 @ 0x1E1E70)
_ZN7WebCore17fireTimerIfNeededEv()+0x38 (section 1 @ 0x1CF0E8)
_ZN14WebViewPrivate21fireWebKitTimerEventsEv()+0x2c (section 1 @ 0xDE24C)
_ZN7WebView21fireWebKitTimerEventsEv()+0x30 (section 1 @ 0xB6030)
_ZL28handleMM_OWBApp_WebKitEventsP6IClassPmP4_Msg()+0xcc (section 1 @ 0x518C)
_ZL8dispatchP6IClassPmP4_Msg()+0x6c0 (section 1 @ 0xF824)
native kernel module intuition.library.kmod+0x0001824c
native kernel module intuition.library.kmod+0x00018470
native kernel module intuition.library.kmod+0x00008448
native kernel module intuition.library.kmod+0x00008088
_Z9main_loopv()+0x1fc (section 1 @ 0x718)
main()+0x1a4 (section 1 @ 0x1214)
native kernel module newlib.library.kmod+0x000020a4
native kernel module newlib.library.kmod+0x00002d54
native kernel module newlib.library.kmod+0x00002ee8
_start()+0x170 (section 1 @ 0x16C)
native kernel module dos.library.kmod+0x00024cd0
native kernel module kernel+0x00041350
native kernel module kernel+0x000413d0

PPC disassembly:
7e935d58: 41beffa8 beq- cr7,0x7E935D00
7e935d5c: 813f0000 lwz r9,0(r31)
*7e935d60: 88090034 lbz r0,52(r9)
7e935d64: 2f80000c cmpwi cr7,r0,12
7e935d68: 409effe8 bne+ cr7,0x7E935D50

System information:

CPU
Model: IBM PowerPC 750 FX V2.2
CPU speed: 800 MHz
FSB speed: 133 MHz
Extensions: performancemonitor

Machine
Machine name: AmigaOne
Memory: 524288 KB
Extensions: bus.pci bus.agp

@ScottCabit

Quote:

What errors ? Where ? How to reproduce ? By a lot you mean 100 or 1000 ? I mean "a lot" mean that you have bunch of them in all the places ?

Plz , post all your errors you have, and how to reproduce your errors. Probably most of them will be not errors, but wrong configuration from your side. Plz, count them all , and describe everything detailed.

Quote:

How to reproduce them ? You around for years, so you know for sure that reporting of any bug are: 1) how to reproduce 2)crashlog 3) as much details as possible.

Quote:

If your ram filled quick, then you will have problems. Check with something like ram-dock, what happens.

Also do normal installation, do everything from scratch, to new dirs, etc, etc. As i remember you have "A lot of errors" with dopus5, which automatically fixes when you just reinstall it.

As for your crashlog: how to reproduce it ?

@kas1e

Hi. I am quite sure from the comments of everyone else that here must be something missing (or something too much) in my configuration. I was wondering about AISS...is there a particular version Odyssey 1.23 needs to run properly?

Ok, you know my system: micro A1 512M RAM standard inbuilt Radeon 32M graphics chip. I have a 3114 SATA hard drive, 1TB in size. My WEB partition where the Odyssey drawer resides is about 44 Gig, of which 42.5 gig is free. It is formatted as SFS02 with 512 byte sector size. I am using a wired LAN internet connected to a WIFI router - I get very high speed downloads - often exceeding 1 megabyte per second.
Odyssey 1.23 was installed in a new folder from the archive on OS4depot. Any old Odyssey folders were deleted.

When I say "a lot" of errors, let me give an example. I go to youtube and the main page comes up just fine. I enter something like "AmigaOne" in the youtube search and see lots of videos available. I go select one and it starts to play. Then I get a DSI. Or perhaps I open another tab and do a google search for Debian Wheezy, select one of the links that comes up, and get a DSI. Odd. No rhyme or reason to it. (Oh...Dopus 5 works fine on this system partition by the way....).
Let me give you a few more memory dumps and you can see if there is a pettern....

@kas1e

As for reproducing crashlogs....it just seems like once I do a certain "thing", everything after that is prone to crashing....and I haven't figured out that "thing" yet.
Here's another crashlog:

Crash log for task "Odyssey"
Generated by GrimReaper 53.16
Crash occured in module Odyssey at address 0x7DA7B8C0
Type of crash: DSI (Data Storage Interrupt) exception

Register dump:
GPR (General Purpose Registers):
0: 7DA7B8C0 62F068A0 2B800009 00000000 60C5FA88 01CA2AD8 00000028 0041583C
8: 5DD521B8 00000000 0165F248 01DB6876 0000015C 60936AB0 7D60B17C 7E1F6FC0
16: 7E1F61D0 7D629760 7D62BE30 7E1FBC80 7E1F61D0 7D629760 7D62BE30 5FEDF734
24: 7D60B17C 7EC02478 62F06934 62F06930 5A8BC5C8 00000000 6081C05C 584AC258


FPR (Floating Point Registers, NaN = Not a Number):
0: nan 0 0 0
4: 0.0221562 -0.999755 7 0
8: 0 -0.999755 4.5036e+15 0.000626087
12: 0 -4.29497e+09 -2.13823e-86 -4.3914e-135
16: -2.57809e+206 -7.35148e-113 -2.04549e+226 -1.44723e+174
20: -1.76558e+58 -3.17604e+71 -7.63092e+212 4.68485e+81
24: 3.08707e-189 -3.12628e+183 -2.14424e+192 5.6887e+61
28: 0 0 1.39604e+09 0

FPSCR (Floating Point Status and Control Register): 0xA6008100


SPRs (Special Purpose Registers):
Machine State (msr) : 0x0000F030
Condition (cr) : 0x54357390
Instruction Pointer (ip) : 0x7DA7B8C0
Xtended Exception (xer) : 0x01426FAC
Count (ctr) : 0x00000000
Link (lr) : 0x00000000
DSI Status (dsisr) : 0x014450EC
Data Address (dar) : 0x00000000



680x0 emulated registers:
DATA: 63520CAE 00000003 00000000 00000000 00000000 00000000 00000000 00000000
ADDR: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 62F062F0
FPU0: 0 0 0 0
FPU4: 0 0 0 0



Symbol info:
Instruction pointer 0x7DA7B8C0 belongs to module "Odyssey" (PowerPC)
Symbol: _ZNK7WebCore14ResourceBuffer12sharedBufferEv + 0x0 in section 1 offset 0x0061189C

Stack trace:
_ZNK7WebCore14ResourceBuffer12sharedBufferEv()+0x0 (section 1 @ 0x61189C)
_ZN7WebCore11CachedImage13finishLoadingEPNS_14ResourceBufferE()+0xa0 (section 1 @ 0x655858)
_ZN7WebCore14ResourceLoader16didFinishLoadingEPNS_14ResourceHandleEd()+0x1c (section 1 @ 0x616AF8)
_ZN7WebCore21ResourceHandleManager21downloadTimerCallbackEPNS_5TimerIS0_EE()+0x294 (section 1 @ 0x1A5DA4)
_ZN7WebCore5TimerINS_21ResourceHandleManagerEE5firedEv()+0x30 (section 1 @ 0x1A815C)
_ZN7WebCore12ThreadTimers24sharedTimerFiredInternalEv()+0x178 (section 1 @ 0x1E1DFC)
_ZN7WebCore12ThreadTimers16sharedTimerFiredEv()+0x44 (section 1 @ 0x1E1E70)
_ZN7WebCore17fireTimerIfNeededEv()+0x38 (section 1 @ 0x1CF0E8)
_ZN14WebViewPrivate21fireWebKitTimerEventsEv()+0x2c (section 1 @ 0xDE24C)
_ZN7WebView21fireWebKitTimerEventsEv()+0x30 (section 1 @ 0xB6030)
_ZL28handleMM_OWBApp_WebKitEventsP6IClassPmP4_Msg()+0xcc (section 1 @ 0x518C)
_ZL8dispatchP6IClassPmP4_Msg()+0x6c0 (section 1 @ 0xF824)
native kernel module intuition.library.kmod+0x0001824c
native kernel module intuition.library.kmod+0x00018470
native kernel module intuition.library.kmod+0x00008448
native kernel module intuition.library.kmod+0x00008088
_Z9main_loopv()+0x1fc (section 1 @ 0x718)
main()+0x1a4 (section 1 @ 0x1214)
native kernel module newlib.library.kmod+0x000020a4
native kernel module newlib.library.kmod+0x00002d54
native kernel module newlib.library.kmod+0x00002ee8
_start()+0x170 (section 1 @ 0x16C)
native kernel module dos.library.kmod+0x00024cd0
native kernel module kernel+0x00041350
native kernel module kernel+0x000413d0

PPC disassembly:
7da7b8b8: 7c0803a6 mtlr r0
7da7b8bc: 4e800020 blr
*7da7b8c0: 80630008 lwz r3,8(r3)
7da7b8c4: 4e800020 blr
7da7b8c8: 81230008 lwz r9,8(r3)

System information:

CPU
Model: IBM PowerPC 750 FX V2.2
CPU speed: 800 MHz
FSB speed: 133 MHz
Extensions: performancemonitor

Machine
Machine name: AmigaOne
Memory: 524288 KB
Extensions: bus.pci bus.agp

@kas1e
Here's another example...I go to youtube, select the video for Transformers, Age of Extinction Trailer and start watching it. It runs for about a minute and a half, then starts "skipping" record sounds...like bad rap music....I move the mouse pointer and get a requester that says:

OWB Fatal Error

Assertion Failed

You can either:

-Crash
-Retry
-Quit

I try crash...Odyssey locks up. If I select quit, wait 10 seconds, then restart...I seem to be more prone to getting errors with the new Odyssey that opens.

I see this requester fairly regularly.....It is often how I end my Odyssey session.

Scott

@tlosm

Hi Luigi, no it's on default OWB.

@Scott
Dunno to be honest. All i can say that if you have requester about crash, you already in troubles, and after that reboot is must. As for DSIs they looks like something from webkit , which i can't fix (maybe Fab, or maybe webkit guys). But probably its all about low-memory.

@ScottCabit

512MB RAM and 32MB VRAM? Are you simply running out?

@Phantom

Antony it is strange...
Try to change in the prefs the default as Iexplorer or safari and check if google enter in mobile version, after switch another time in odyssey

I did that already to no avail.