Or, if you want to check it with sound, just grab ahi_dev.c , it will works for sure with any mplayer version.
libao2/ao_ahi_dev.c works without having to use anything else (amigaos-stuff.c, AmigaOS changes in mplayer.c and other parts)?
Quote:
Probably 120 version of mplayer is better :)
4 or 6 should be enough non-altivec with AmigaOS GUI, altivec with AmigaOS GUI, non-altivec with MUI GUI, altivec with MUI GUI and maybe Sam4x0 versions with AmigaOS GUI and with MUI GUI.
Quote:
@Joerg Will you in interst to make vo_comp.c , but with 100% sharing of code ? (we can make some bounty, etc).
I'll change my current pip vo to an amigaos vo which will work on any gfx card, with or without overlay support, anyway, but I don't plan to use compositing in it and duplicate LiveForIt's work. It will be much faster than the sdl vo and cgx emulation, without compositing about the same speed as the old p96_pip should be possible, but it wont be as fast as my new pip or the comp vo.
I intend to share the code, just want to do some stuff before I do, stop nagging. I have already committed lots of changes, I have not seen anyone else done that in along time.
There is lots of stuff to be fixed (If you want help out), Arexx (bit broken now), (p96 Strohmayer is working on.)
* Reaction GUI stuff move it to where it should be. * Get the custom GUI stuff working see the official mplayer site. * Optimizing, Optimizing and Optimizing.
Edited by LiveForIt on 2014/4/22 17:47:14
(NutsAboutAmiga)
Basilisk II for AmigaOS4 AmigaInputAnywhere Excalibur and other tools and apps.
Yes it be nice to clean up the cgx stuff, so people don't need to look for missing header files. Anyway my vo_cgx_wpa is already more picasso96 then cgx, but not yet clean, don't think I can remove the includes yet. Really it should be called “vo_p96_wpa”, but anyway.
(NutsAboutAmiga)
Basilisk II for AmigaOS4 AmigaInputAnywhere Excalibur and other tools and apps.
LiveForIt : and do you think, since AltiVec has been used for G4/PA6T and DMA for Sam440/460, that you could try to use Xena to improve even further the decoding process (Xena is a 500Mhz chip if I remember well) ?
BTW I tried to read a DVD and I was asked to assign dvdnav: and a1ide.device:
When assigning them to anywhere (T: for instance), it works but it's really jerky (your Mplayer version was compiled without cache support).
LiveForIt : and do you think, since AltiVec has been used for G4/PA6T and DMA for Sam440/460, that you could try to use Xena to improve even further the decoding process (Xena is a 500Mhz chip if I remember well) ?
hold your horses, support for AltiVec and DMA comes free, as existing libs are making use of this things automatically.
The use of XENA is undefined, maybe it can be used, maybe it can not, its likely its useless whit out a XZORRO card, whit additional logic chips.
I don't think I have time or interest in specialize on that chip.
Quote:
BTW I tried to read a DVD and I was asked to assign dvdnav: and a1ide.device:
This is new information for me, some one will need to investigate.
Quote:
your Mplayer version was compiled without cache support.
Yes MikeJT has been telling me its some thing I can enable some how, I was thinking of investigating, but have not done so yet.
Edited by LiveForIt on 2014/4/25 14:23:05
(NutsAboutAmiga)
Basilisk II for AmigaOS4 AmigaInputAnywhere Excalibur and other tools and apps.
New beta version: http://www.sendspace.com/file/3ftv3i I've added the ahi_dev ao from the code.google.com MPlayer version and fixed some bugs in it (untested), and support for gfx cards without overlay.
you've got two options. either you can use the xzdec command line tool (link) or use chris young's xz client for unarc (link), which is what i do. note that the latter needs lzma.library installed.
-- eliyahu
"Physical reality is consistent with universal laws. When the laws do not operate, there is no reality. All of this is unreal."
Very good version, sound now works as expected, however not perfect yet, if you put a video in pause you will got a strange audio delay, aka the last second of the sound (exactly when you paused it) will be repeated, not a big issue but still
Also i noted that you have removed the Mute option, maybe because it was too mutch bugged for now ?
But apart that this version seems very good, just (as we should have already all the source in repo) i wonder if step by step it will be possible for you to re-enabled all the missing features we had in the the original afxgroup's version, infact for now with your version it isn't possible to use MPlayerGUI (audio start but video are not displayed even if you set p96_pip) .. then double-click for fullscreen, drag&drop etc
Very good version, sound now works as expected, however not perfect yet, if you put a video in pause you will got a strange audio delay, aka the last second of the sound (exactly when you paused it) will be repeated, not a big issue but still
I can't test anything audio related, I don't have speakers connected to my Sam440ep. Roman wrote it's working without having to use anything else from the code.google.com MPlayer version, but that's obviously not the case.
Quote:
Also i noted that you have removed the Mute option, maybe because it was too mutch bugged for now ?
As I wrote already it depends on the ARexx port which isn't included. I'm using the original mplayerhq.hu SVN sources, nothing (except for the ahi_dev ao now) from any AmigaOS port of MPlayer, and there is no ARexx port in the original version of MPlayer.
Quote:
i wonder if step by step it will be possible for you to re-enabled all the missing features we had in the the original afxgroup's version
Except for the "Mute" and "On top" menu items, which depend on the ARexx parts, it has everything my old p96_pip had I implemented for afxgroup's MPlayer version 1.0pre8. That's the one I used as base for my new vo, I have no idea what he added to it in later versions of his MPlayer. Merging my parts with the code.google.com MPlayer is only possible after Varthall has updated it to the current MPlayer version, I wont do a backport to the ancient version currently used there.
Quote:
infact for now with your version it isn't possible to use MPlayerGUI (audio start but video are not displayed even if you set p96_pip)
It was never "p96_pip" in my MPlayer executables but "pip", starting with beta6 it's "amiga" instead.
I can't test anything audio related, I don't have speakers connected to my Sam440ep. Roman wrote it's working without having to use anything else from the code.google.com MPlayer version, but that's obviously not the case.
But kas1e was right because sound indeed work, my report was only about this little glitch when you put a video in pause .. but it's not too problematic and even as is it's 100% usable (for sure better than no audio at all)
Quote:
As I wrote already it depends on the ARexx port which isn't included. I'm using the original mplayerhq.hu SVN sources
Ok
Quote:
Except for the "Mute" and "On top" menu items, which depend on the ARexx parts, it has everything my old p96_pip had I implemented for afxgroup's MPlayer version 1.0pre8. That's the one I used as base for my new vo
So even at beginning the repo was useless for you ? i though you were used the latest versions from there, not an old release from your hard disk
Quote:
I have no idea what he added to it in later versions of his MPlayer
Here is the full changelog of the afxgroup releases:
All that modifications since yours 1.0pre8 should be already availible in repo, that's why i ask if eventually you were able to re-enable them, just i didn't though that you started from an old source instead, but still
Quote:
Merging my parts with the code.google.com MPlayer is only possible after Varthall has updated it to the current MPlayer version, I wont do a backport to the ancient version currently used there.
Right, maybe LiveForIt when he have the time .. hope it will not too mutch difficult, but if that results in a future merge between the various efforts i think it will worth for sure!
Quote:
It was never "p96_pip" in my MPlayer executables but "pip", starting with beta6 it's "amiga" instead.
Ah ok clear now, problem is that with the name changed as "amiga" it's now currently incompatible with the latest version of the GUI (1.51)
So even at beginning the repo was useless for you ?
I read https://code.google.com/p/mplayer-amig ... owse/trunk/notes_amigaos4 and yes, something like that is useless and just a waste of time, especially since, except for having to change a few things in config.h manually after running configure, using the original mplayerhq.hu SVN sources simply works, without such a mess. They just don't include much AmigaOS parts (a few are there).
Quote:
i though you were used the latest versions from there, not an old release from your hard disk
I'm using the current SVN MPlayer sources from mplayerhq.hu, only my new amiga vo is partially (menus, keyboard input, etc.) based on my old p96_pip vo sources.
Quote:
All that modifications since yours 1.0pre8 should be already availible in repo,
Most of it very likely only works with the old MPlayer version used there, not with a current one, therefore I can't use it until it's updated to the current MPlayer.
Merging my parts with the code.google.com MPlayer is only possible after Varthall has updated it to the current MPlayer version, I wont do a backport to the ancient version currently used there.
Varthall will not update it, as he busy for last years, and didn't do anything with it.
But anyway, probably backporting of your current p96_pip version to code on googlecode, will be the same as using ahi_dev on new one : i.e. almost no changes will need it, just few. At least i can use almost without changes your old p96_pip and on 2 years old mplayer sources, and on latest one, with simple changes.
News feed
OS4 Feedback forum
OS4Depot Feedback forum
Amigabounty forum
OpenAmiga forum
AmiCygnix forum
ABC shell forum
AmiKit forum
Cinnamon Writer forum
CodeBench forum
Digital Universe forum
Dopus 5 forum
E-UAE forum
Gnash forum
Ibrowse forum
JAmiga forum
Odyssey forum
OWB forum
Qt forum
SmartFileSystem forum
Timberwolf forum
TouchDevice forum
TuneNet forum
Unsatisfactory Software forum
Donate
