AmigaoneXEG4

@poweramiga

Preferences > GUI > Effects: Checkbox for Composting Enable

It should NOT be checked.

@poweramiga

9800 cards are badly supported (no 2D acceleration nor 3D of I'm not mistaken.

@logicalheart

Thanks guys that did the trick nice and fast now :) i take it that its because of the 9800pro not being supported with 3D ?

Ok guys what is the absolute best GFX card i can buy for my A1 that is fully supported ? im rebuilding the A1 from scratch going to sata drives have 2g ram working

Can we use the x800 x1600 agp cards in the A1 ?

@poweramiga

With "fully supported" you mean with 3D accel?
If so, than i think for now it's still a Radeon 9250 (i can be wrong though)

The fastest PCI gfx card not HD, some claim to be this one
Hercules 3DProphet Radeon 8500 128MB (no 3D accel, yet, i believe)

Or you can go looking for PCI Radeon HD cards, but you have to be lucky to have a hardware that supports it, my XE wasn't, it crashed as soon as the USB was loaded.

Also be sure to choose PCI (not PCI-e)...also remember that these don't have 3D acceleration support (yet)

For the AmigaOne XE, the best Radeon card supported is the Radeon 9000 Pro AGP.

ok thanks guys looks like its a 9000 pro with as much gfx ram as i can find hopefully 256meg on board

@All

Today i got a new sii3112 controller board and sata 1tb drive all seems to work with old drive plugged in but cant boot from the sata drive its found in uboot have slb etc but i formatted it as sfs2 is that ok ?
it tries to boot it in uboot finds slb then fails saying cant find settings any ideas ?

also made DH0: 4.5g is that ok too

On the AmigaOne XE Uboot is stuck in 2008 or so. It cannot know SATA controllers so you cannot boot from there.

If I'am not wrong the XE can boot from the sata controller,
but not from a sfs2 partition, only ffs or sfs

@pvanni
Yup your right changed to sfs and its booting fine so sfs2 is not a bootable filesystem

@poweramiga,
nice